Support

INTEGRA-7 System Update Ver.1.21

This is the latest version of operating system for the INTEGRA-7.

How to tell the version
Please check the version of the system working on your INTEGRA-7 before downloading the archive file.
  1. Press [ MENU ] to invoke the menu screen.
  2. Use the cursor buttons to choose SYSTEM, and then press the [ ENTER ] button.
  3. Use the cursor buttons to select the VERSION tab.
    The version information screen appears.
* Don't perform the update if the product is already up-to-date.


Version history
[ Ver.1.21 ]
[ Additional Functions ]
  • Support was added for the ONKYO UWF-1 Wireless USB Network Adapter.
[ Functionality Improvement ]
The following bug was fixed.
  • The manner of sound attenuation when lowering SN Strings with Expression was adjusted.
    * This affects the categories of Strings, Accordion/Harmonica, Vox/Choir, Brass, Sax, Wind, Flute, and Recorder.
[ Ver.1.20 ]
[ Additional Functions ]
  • INTEGRA-7 Editor for Mac and INTEGRA-7 Librarian for Mac are supported.
  • [ RESTORE LIB DATA ] was added to [ UTILITY ] of [ MENU ].
    This function is convenient to restore the SVD file that has been output from Librarian. At restoration, only the system parameter "Startup Expansion Slot A-D" is overwritten. This prevents unintended changes of the system parameters during use of Librarian.
[ Ver.1.12 ]
[ Bug Fix ]
The following bug was fixed.
  • An INTEGRA-7 froze under certain specified conditions when you performed with a tone of the "253:UilleanPipes" or "254:Bag Pipes" contained in the SuperNATURAL Acoustic Tones.
[ Ver.1.10 ]
[ Additional function ]
  • Available for Roland Wireless Connect ( WNA1100-RL ).
    Please refer to the "About the Wireless LAN Function ( INTEGRA-7_l_wireless_e02_W.pdf )" for detailed information.
[ Bug Fix ]
The following bug was fixed.
  • When you woke up a personal computer connected with INTEGRA-7 via USB from the sleep mode, the USB connection would be cut off.


Items to prepare for the update
Following items are required to perform the update.
  • INTEGRA-7 itself
  • PC to write the updater to the USB Flash Memory
  • USB Flash Memory ( Roland's M-UF2G is recommended )
    * The USB Flash Memory need to be formatted on a INTEGRA-7.


Cautions with the update
  • We recommend that you save your data to a USB Flash Memory before you perform the update. If a problem occurs and your data is lost, you will be able to restore the original state by reloading the data you saved. For details on the procedure, refer to the following sections of the "Backing Up User Data" of the Owner's Manual.
  • Never apply this update data to any product other than the INTEGRA-7. This update data may destroy the data or system program of other products.
  • Never power-off your INTEGRA-7 while the update is in progress!
    If a power failure or similar accident occurs during the update process, the INTEGRA-7 won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
  • We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.


How to download and expand the archive file
Download the file named "integra7_sys_121.zip".
It is an archive file in zip format, please double click on the file to expand. After expanding the file, the folder "integra7_sys_121" holding the file "integra7_up.bin" will be appeared.


How to update
Please install the system program "integra7_up.bin" to the INTEGRA-7 by following the process below.

Important notice: Never turn the INTEGRA-7 off during the update process, or INTEGRA-7 won't reboot correctly any more.

  1. Copy the update-use file ( integra7_up.bin ) to the root directory of the USB Flash Memory.
  2. Make sure the unit's power is switched off, then connect the USB Flash Memory device to the USB MEMORY connector at the left edge of the Top Panel.
  3. Hold down the [ SHIFT ] button and switch on the power.
  4. When the message "start update." appears, release the button.
    The update starts.
    * The update process takes several minutes to finish. Be sure never to switch off the power before the operation finishes.
  5. When the message "===update finished.===" is displayed, the operation has finished. (You will take about 2 minutes to update.)
  6. Switch off the power.
  7. Detach the USB Flash Memory, then switch on the power to the unit and verify that the version has been updated.


支援

Quick Links