Roland - 支援 - Aerophone AE-10 - 更新&驅動程式 - Aerophone AE-10 System Program (Ver.3.10)

Aerophone AE-10 System Program (Ver.3.10)

CHECK WHAT VERSION YOU'RE USING
Before you start, check the system program version of your AE-10.

Turn on the power.
Press the [MENU] button to display the menu screen.
Operate the left and right buttons under the [MENU] button to select "Version."
The current version is shown on the display.
* Don't perform the update if the product is already up-to-date.
Press the [TONE] button to return to the tone selection screen.

UPDATE HISTORY
[ Ver.3.10 ] DEC 2019

Added Tone

"Soprano K Sax Bb" tone was added.
Please refer to the "Aerophone AE-10 Tone List" in the [ Owner's Manuals ] page for detailed information.

Functionality Improvement

Setting items related to the bite sensor were added or modified.
Please refer to the "Aerophone AE-10 Ver.3.10 Notice of Added and Changed Function" in the [ Owner's Manuals ] page for detailed information.

[ Ver.3.00 ] JUL 2018

Added Tones

A total of 66 new tones have been added.
Together with the existing 62 tones, this makes for a total of 128 tones.
Please refer to the "Aerophone AE-10 Tone List" in the [ Owner's Manuals ] page for detailed information.

Functionality Improvement

The existing 62 tones were enhanced.

[ Ver.2.20 ] DEC 2017

Added Tones

Sax tones suited to jazz, pops, and rock were added.
Please refer to the "Aerophone AE-10 Tone List" in the [ Owner's Manuals ] page for detailed information.

Additional Functions
The functions described below have been added.
Please refer to the "AE-10 Ver.2.20 Notice of Added and Changed Function" in the [ Owner's Manuals ] page for detailed information.

Operation modes were added to "Bite Sensor Control Setting ( BiteCtrl )."
The following fingerings were added.
- Fingering that lets you perform using only the left hand
- Fingering that lets you perform using only the right hand

Functionality Improvements

The setting methods for "Bite Sensor Center Adjustment ( Bite Adj )" and "Bite Sensor Sensitivity Setting ( BiteSens )" were changed.
Please refer to the "AE-10 Ver.2.20 Notice of Added and Changed Function" in the [ Owner's Manuals ] page for detailed information.

Bug Fixes
The following bugs were fixed.

Sound sometimes fails to be produced when blown.
The portamento effect sometimes fails to be applied.

[ Ver.2.10 ] APR 2017

Additional Functions
Please refer to the "AE-10 Ver.2.10 Notice of Added Function" in the [ Owner's Manuals ] page for detailed information.

Support for the "AE-10 Editor" iOS app was enabled.
The following fingerings were added.
- Recorder fingering
- Electronic wind instrument fingering
- Trumpet fingering

[ Ver.2.00 ] DEC 2016

Added Tones

A total of 15 new tones have been added.
Please refer to the "Aerophone AE-10 Tone List" in the [ Owner's Manuals ] page for detailed information.

Additional Functions
The functions described below have been added.
Please refer to the "AE-10 Errata and Added Functions on Ver.2.00" in the [ Owner's Manuals ] page for detailed information.
* The symbols in the table indicate the following setting items.

star mark: Tone Setting
S mark: System Setting

Tone volume level
Vibrato sensitivity
Amount of vibrato pitch change
Enable/disable user tone shortcuts
Key delay function
Flageolet sax fingering on/off
MIDI Control Change message output setting for breath sensor
MIDI Control Change message output setting for bite sensor
Backup function for user tones and system settings
Restore function for user tones and system settings
Delete function for user tones

Quick Start Video " Vibrato "
Quick Start Video " Automatic Vibrato Function "
Quick Start Video " Using the Aerophone to Play a Software Synthesizer "

Functionality Improvements

Operation of the breath and bite sensors was improved.
A setting value for breath sensitivity was added.

Bug Fixes
The following bugs were fixed.

The problem of values not being applied when switching Transpose or Octave Shift was corrected.

WHAT YOU WILL NEED TO UPDATE YOUR AE-10

AE-10
AC adaptor
USB cable
* The update is carried out with the unit and the computer connected via USB.
Provide a cable suitable for connection to the computer you're using.
Computer (Windows or Mac) equipped with a USB port compliant with USB 2.0 or USB 3.0

CAUTION WHEN PERFORMING THE UPDATE

Never apply this update data to any product other than the AE-10. This update data may destroy the data or system program of other products.
Never power-off your AE-10 while the update is in progress!
If a power failure or similar accident occurs during the update process, the AE-10 won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

GETTING THE UPDATE FILE

Please open/extract the downloaded "ae10_sys_v310.zip" file on your computer to get the update file in the "ae10_sys_v310" folder.

PROCEDURE FOR THE UPDATE
Caution

Performing an update initializes all setting values made using system settings. Refer to the Owner's Manual and make a written note of the settings.
You must not rename the extracted file.
When performing an update, be sure to connect the AC adaptor included with the AE-10.
Never turn off the AE-10's power while the update is in progress. Otherwise the system program or the AE-10 itself may be destroyed.

Please install the extracted system program file into your AE-10 according to the following procedure.

Step 1: Update the Aerophone AE-10 to Version 3.00

Connect the computer to the AE-10's USB port by a USB cable.
Hold down the octave key [ -2 ] button and turn on the power.
On the display, the message "Updater" appears, after which the message "Waiting." appears.
Open the "AE-10" drive folder in your personal computer.
Copy ae10_up.bin in the "ae10_sys_v310" folder into the "AE-10" drive by dragging and dropping it.
* Do not copy the "ae10_sys_v310" folder.
After copying the file is completed, remove the USB drive from the personal computer.
With Windows
Right-click on the "AE-10" icon in My Computer and execute "Eject."
With Mac
Drag the "AE-10" icon to the Trash icon in the Dock.

* Depending on the computing setup you're using, ejecting the USB drive might cause the update to start. If this happens, wait for the message "Finished" to appear on the display before disconnecting the USB cable.
Disconnect the USB cable.
The update starts automatically. The update takes approximately 1 minute.
* Never switch off the power while the update is in progress.
When Finished is shown, the update has finished.
Turn the AE-10 power off.

If the unit you're using was at "Ver. 2.**" before the update, then the update procedure is complete. You can now use the unit at version 3.00.
If the unit you're using was at "Ver. 1.**" before the update, continue by carrying out the procedure in "Step 2: Return Settings to Their Factory-default Values (Factory Reset)."

Step 2: Return Settings to Their Factory-default Values (Factory Reset)

* Executing a factory reset while the system is at version 1.** causes all user tone settings to be initialized.
* In Ver.2.00 and later, the factory reset operation (FctReset) only resets the system settings, and does not clear the user tones.

Hold down the [MENU] button and turn on the power.
"FctReset" appears on the display.
To execute the factory reset, press the right-arrow (Y) button.
When the message "END" appears on the display, the factory reset is complete.
Turn on the power.
Refer to "Check what version you're using" and confirm that the version has been updated to show "Ver.3.00."

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

Aerophone AE-10 System Program (Ver.3.10)

支援

Quick Links