Roland - 支援 - Aerophone Pro - 更新&驅動程式 - Aerophone Pro AE-30 System Program (Ver.3.02)

Aerophone Pro AE-30 System Program (Ver.3.02)

HOW TO FIND THE VERSION
Please check the current version of the system program on your AE-30 before downloading the file.

Turn the AE-30's switch "ON".
On the scene screen, press the [MENU] button.
The Menu screen appears.
Use the [-] [+](< / >) buttons to select "Version".
The current program version is shown in the display.
- Ver.3.02 or later: Applying this update is not necessary.
- Ver.3.01 or earlier: This is an old version. Please update to the latest version.
Press the [SCENE] button or turn the [SCENE CATEGORY] knob to return to the scene screen.

UPDATE HISTORY

[Ver.3.02] JUL 2023

Bug Fixes

The problem was corrected in which system lockup occurred in extremely rare cases during poor signal conditions while connected with a Bluetooth device.
The problem was corrected in which the keys failed to be deactivated even when the key function for the octave keys was set to "Off".
The problem was corrected in which noise was sometimes produced at the start of the sample when playing a tone in which a user sample or multi-sample is combined.

Functionality Improvements

Because unintended Bluetooth connection to another device sometimes occurs, functionality has been changed so that the Bluetooth function is set to "Off" when a factory reset is carried out.

[Ver.3.01] JUN 2023

Bug Fixes

When playing slurs, etc., depending on the amount of breath you blow in, it may not be pronounced in rare cases.

[Ver.3.00] MAR 2023

Please refer to "Aerophone Pro AE-30 Version 3.00 Notice of Added Functionality" and "Aerophone Pro AE-30/Aerophone AE-20 Parameter Guide" for detailed information.

Additional Functions

Display of the on/off status of the [S1] and [S2] buttons has been added.
A Scale Tune function has been added that lets you set the tuning method and adjust the pitch for individual note names.
An Intelligent Harmony function has been added that lets you layer harmonies according to the key that has been set.
The Harmony function now lets you change the pitch of layered sounds to just intonation.
User scenes can now be imported and exported.
User scenes created on the FANTOM-6/7/8 and FANTOM-06/07/08 can now be imported and exported.

Functionality Improvements

"AE La Seine" sounds have been added.
Sounds using the Scale Tune function have been added.
Sounds using the Harmony function have been added.

[Ver.2.11] OCT 2022

The factory-default test program was updated.
Actual product operation is unaffected.

[Ver.2.10] SEP 2022

Functionality Improvements

Improvements to the following functions in the "Sax" and "Clarinet" fingering modes
- Unintended notes are now more difficult to produce even when the incorrect key is fingered.
- The sound-production behavior of keys played in tandem on acoustic instruments has been partially re-created.
It is now possible to access functions that use a USB flash drive even while a performance key is depressed.
When the Harmony function is on, the sequence in which the Note On messages for harmony notes is sent has been improved.

Bug Fixes
This release fixes the following issue.

The problem has been corrected in which scene and tone names sometimes do not match when creating a user scene at the Expansion Manager screen.

[Ver.2.03] JUN 2022

The factory-default test program was updated.
Actual product operation is unaffected.

[Ver.2.02] NOV 2021

Functionality Improvements

Operation of the motion sensor has been improved.

Bug Fixes
This release fixes the following issue.

Minor bugs.

[Ver.2.00] AUG 2021

Please refer to "Aerophone Pro AE-30 Owner's Manual" and "Aerophone Pro AE-30 Parameter Guide" for detailed information.

Additional Functions

Roland Cloud content is supported.
Motion sensor support has been added.
The built-in display now has multilingual support (English, Japanese, and Chinese).
New fingerings have been added (clarinet and flute).
An X-Fade function has been added.

Functionality Improvements

A Thumb Pad Off function has been added.
New tones have been added.

[Ver.1.11] APR 2021

Please refer to "Aerophone Pro AE-30 Owner's Manual" and "Aerophone Pro AE-30 Parameter Guide" for detailed information.

Additional Functions

Aerophone Pro Editor's "Librarian function" is now supported.

Functionality Improvements

In "Restoring the Factory Settings", resetting of Bluetooth settings (initialization of Bluetooth) has been eliminated.
Bluetooth settings persist when the operation in "Restoring the Factory Settings" is carried out.
*To reset (initialize) Bluetooth settings, carry out the "Bluetooth Reset" operation.

[Ver.1.10] MAR 2021

Please refer to "Aerophone Pro AE-30 Owner's Manual" and "Aerophone Pro AE-30 Parameter Guide" for detailed information.

Additional Functions

An "Output Mode" has been added to enable switching the audio signal output from the PHONES jack and the OUTPUT jack between stereo and monaural.
A "Bend Range Mode" for making settings for the operation of the Bend Range has been added.
A "Transpose Knob Mode" has been added for making settings for the functionality of the [TRANSPOSE] knob.
"Scene Shortcut" has been added for using shortcuts to switch between scenes.
"All Effects Off" has been added to turn off all effect settings made for scenes.

Change the specifications

Parameter category of Assign Source setting have been changed from "Scene Setting" to "System Settings".
Part MFX have been enabled for SuperNATURAL tones.

Functionality Improvements

Operation when the Bite Ctrl Mode is set to "E-Wind" has been improved.
The response speed of the Breath Sensor has been improved.

[Ver.1.04]

The factory-default test program was updated.
Actual product operation is unaffected.

WHAT YOU NEED FOR THE UPDATE
Updating the AE-30 system program requires the following items.

Aerophone Pro AE-30
Included AC adaptor
USB flash drive (Type-C, FAT32 file system)
*If the AE-30 fails to recognize a USB flash drive, then on a computer, format the USB flash drive to use the FAT32 file system (on a Mac: "MS-DOS (FAT)").
*Using a USB Type-C adapter lets you connect a USB flash drive that has a USB A connector. Note, however, that making a good connection when using a multifunction-type adapter is sometimes not possible.
PC (Windows/Mac) to write the updater to the USB Flash Memory

CAUTION WHEN PERFORMING THE UPDATE

Never apply this update data to any product other than the AE-30. This update data may destroy the data or system program of other products.
Never power-off your AE-30 while the update is in progress!
If a power failure or similar accident occurs during the update process, the AE-30 won't be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program.

DOWNLOADING AND UNARCHIVING THE COMPRESSED FILE

Read the software license agreement at the bottom of the screen and select the "I agree" check box.
Click the "Download" button to download the system program (ae30_sys_v302.zip).
Unarchive the downloaded file.
- Windows: Right-click the file and select "Extract All," then click "Extract".
- macOS: Double-click the file to unzip it.
  *Never double-click "AE-30_UPA_up.bin" displayed inside the folder after unarchiving.
Copy "AE-30_UPA_up.bin" to the level displayed immediately on accessing the USB flash drive (the USB flash drive's root directory).
- Windows
- macOS

UPDATE PROCEDURE

Caution

The final step of the update procedure is an operation to return the system settings to their factory-default state (a factory reset). If it will be necessary to restore system settings after updating, make a written note of the required parameter values.
*Parameter types and setting-value levels might be changed by this update.
*Performing this operation does not erase the scenes that are stored in the user scenes.
You must not rename the extracted file.
Never turn off the AE-30's power while the update is in progress. Otherwise the system program or the AE-30 itself may be destroyed.

Follow the steps below to install the extracted system program on your AE-30.

Turn the AE-30's switch "OFF".
Connect the USB flash drive containing the "AE-30_UPA_up.bin" file to the AE-30.
Connect the included AC adapter to the AE-30.
Hold down the +2 octave and -2 octave keys simultaneously and switch on the power to the unit.

The display shows "AE-30 Updater", and the update starts.
*It takes about 3 minutes to complete the update.
Once the message "Please Power Off" appears on the display, turn the AE-30 off.
Remove the USB flash drive from the AE-30.
Turn the AE-30's switch "ON".
?It might happen that the message "Upd Sub Cpu Main" is displayed and another update starts. If the message "Turn off the power" is displayed, turn the power source off and back on, then proceed to the next operation.
Press the [MENU] button.
The Menu screen appears.
Use the [-] [+] (< / >) buttons to select "Factory Reset", and press the [MENU] button.
A confirmation message appears.
Press the [+] (>) button.
A confirmation message appears again.
Press the [MENU] button.
The display indicates "Executing...," and the factory reset operation is executed.
Once the message "Turn off the power" appears on the display, turn the AE-30 off and then on again.
*If necessary, change the system-setting parameters to the values previously written down.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

Aerophone Pro AE-30 System Program (Ver.3.02)

支援

Quick Links