Roland - 支援 - DEMORA - 更新&驅動程式 - AIRA Modular System Program (Ver.1.05)

AIRA Modular System Program (Ver.1.05)

This system program updates the AIRA Modular ( BITRAZER, DEMORA, TORCIDO, SCOOPER ) system program to the latest version 1.05.

What you will need to update your AIRA Modular

BITRAZER, DEMORA, TORCIDO, SCOOPER
AC adaptor
USB cable ( A-microB type )
A computer with a USB connector ( Windows / MacOS X )

How to tell the version

Please check the version of the system working on your AIRA Modular before downloading the archive file.

Hold down [ GRF 6 ] button, and switch on the power.
Connect the computer to the AIRA Modular's USB port by a USB cable.
Open the "AIRAMODULAR" drive folder in your personal computer.
Open VERSION.TXT in the AIRAMODULAR drive, and check the version.
Close VERSION.TXT, end the USB connection on the computer, then disconnect the USB cable.
Turn the AIRA Modular power off.

* If this shows the latest version, there's no need to update your AIRA Modular.

Update history

[ Ver.1.05 ]
BITRAZER

[ Functionality Improvement ]

The effective range for BIT DOWN was adjusted.

DEMORA

Internal processing has been improved.
* There is no change affecting the product specification.

TORCIDO

[ Functionality Improvement ]

The effective range for TUBE WARM was adjusted.

SCOOPER

[ Additional Function ]

An overdub function was added.
* When the overdub function is switched on, input via the INPUT 1 and 2 connectors is always throughput.

Making the Overdub Setting
1. Hold down the [ REC/PLAY ] button and turn on the power.
2. Use the [ SYNC TRIG ] button to set the overdub function on or off.
  
  [ SYNC TRIG ] button lighted : On
  [ SYNC TRIG ] button dark : Off
3. Press the [ REC/PLAY ] button to quit the settings for the overdub function.
Using Overdub
< Overdub >
During loop playback, press the [ REC/PLAY ] button.
* During overdubbing, the [ REC/PLAY ] button lights up, and the center indicator lights up in orange.

< Playback >
While stopped or during overdubbing, press the [ REC/PLAY ] button.
* During playback, the [ REC/PLAY ] button lights up, and the center indicator lights up in blue.

< Stopping >
During overdubbing or loop playback, press the [ REC/PLAY ] button two times in succession.
* Press the button twice within 1 second.

Caution when performing the update

Never apply this update data to any product other than the BITRAZER, DEMORA, TORCIDO or SCOOPER. This update data may destroy the data or system program of other products.
Never power-off your AIRA Modular while the update is in progress!
If a power failure or similar accident occurs during the update process, the AIRA Modular won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Getting the update file

Please open/extract the downloaded "airamod_sys_v105.zip" file on your computer to get the update file in the "airamod_sys_v105" folder.

Procedure for the update
Caution

You must not rename the extracted file.
Never turn off the AIRA Modular's power while the update is in progress. Otherwise the system program or the AIRA Modular itself may be destroyed.

Please install the extracted system program file into your AIRA Modular according to the following procedure.

Hold down [ GRF 6 ] button, and switch on the power.
Connect the computer to the AIRA Modular's USB port by a USB cable.
Open the "AIRAMODULAR" drive folder in your personal computer.
Copy AIRA_MODULAR_UPD.BIN in the "airamod_sys_v105" folder into the "AIRAMODULAR" drive by dragging and dropping it.
* Do not copy the "airamod_sys_v105" folder.
After copying the file is completed, remove the USB drive from the personal computer.
With Windows 10 / 8 / 7

Right-click on the "AIRAMODULAR" icon in My Computer and execute "Eject."
With Mac OS X

Drag the "AIRAMODULAR" icon to the Trush icon in the Dock.
Disconnect the USB cable.
The center indicator lights up in light blue, and the [ GRF 6 ] button flashes.
Press the [ GRF 6 ] button to start updating the file.
While the update is in progress, the center indicator lights up in white and GRF 5 and GRF 6 light up in alternation.
When the update ends, the center indicator flashes in blue, and GRF 5 and GRF 6 also flash.
Turn the AIRA Modular power off.
Please verify the version number with the procedure described in "How to tell the version" part of this document.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

AIRA Modular System Program (Ver.1.05)

支援

Quick Links