Roland - 支援 - DJ-505 - 更新&驅動程式 - DJ-505 System Program (Ver.1.10)

DJ-505 System Program (Ver.1.10)

How to know the version
Before you start, check the system program version of your DJ-505.

While holding down the [rotary selector] in the Browser Section and turn on the power.
The version information screen appears.
After checking version of the product, power off the DJ-505 without performing any button operation.

Update history
[ Ver.1.10 ] JAN 2018
Please refer to the "DJ-505 Owner's Manual" for detailed information in the [ Owner's Manuals ].

Additional Functions

Additional Functions

Added Backspin Length setting
Added Jog dial top surface sensitivity adjustment
Added Performance Pad Sensitivity setting
Added "Step Loop" function for TR-S
Added TR KIT SELECT for TR-S
Added KIT COPY for TR-S
Low Tom instruments expanded "Color" parameter

Functionality Improvements

Added TR-606 / TR-707 sounds for TR-S
Increases the TR-S's KIT count from 8 to 12
Added Effects for TR-S
Expanded BPM range from 40 - 300 to 5 - 500

* To update the TR-S, a factory reset is required after applying the update data. For the procedure, refer to "Factory Reset."

What you will need to update your DJ-505

DJ-505
USB cable included with the DJ-505
A computer with a USB connector ( Windows, Mac )

Caution when performing the update

Never apply this update data to any product other than the DJ-505. This update data may destroy the data or system program of other products.
Never power-off your DJ-505 while the update is in progress!
If a power failure or similar accident occurs during the update process, the DJ-505 won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Getting the update file

Please open/extract the downloaded "dj202505_sys_110.zip" file on your computer to get the update file in the "dj202505_sys_110" folder.

Procedure for the update
Caution

You must not rename the extracted file.
Never turn off the DJ-505's power while the update is in progress. Otherwise the system program or the DJ-505 itself may be destroyed.

Please install the extracted system program file into your DJ-505 according to the following procedure.

Hold down the [CLEAR] button and turn on the power.
Connect the computer to the DJ-505's USB port by a USB cable.
Open the "Roland" drive folder in your personal computer.
Copy DJ202-505_C0A_up.bin in the "dj202505_sys_110" folder into the "Roland" drive by dragging and dropping it.
* Do not copy the "dj202505_sys_110" folder.
After copying the file is completed, remove the USB drive from the personal computer.
With Windows

Right-click on the "Roland" icon in My Computer and execute "Eject."
With Mac

Drag the "Roland" icon to the Trash icon in the Dock.

* Depending on the computing setup you're using, ejecting the USB drive might cause the update to start.
Disconnect the USB cable.
The update starts automatically.
The performance pads flash while the update is in progress.
When the performance pads stay lighted, the update is complete.
Detach the USB cable and turn off the power.
* The performance pads might flash at the first startup after the update. This is not a malfunction; without turning off the power, wait for the unit to start up.

Factory Reset
To update the TR-S, the operation in "Returning to the Factory Settings (Factory Reset)" is required after applying the update data.
Executing the operation in "Returning to the Factory Settings (Factory Reset)" enables you to load the most recent tone data.
Please refer to the "DJ-505 Owner's Manual" for detailed information in the [ Owner's Manuals ].

* Executing the procedure in "Returning to the Factory Settings (Factory Reset)" causes the settings and patterns in the DJ-505 to be lost.
Before executing the procedure in "Returning to the Factory Settings (Factory Reset)," use the procedure in "Backup" to save any necessary data onto a computer.
* The data in "system settings" cannot be backed up. Before executing the procedure in "Returning to the Factory Settings (Factory Reset)," make a written note of any necessary items.

Backup
Here's how to back up all patterns and kits (instruments).

While holding down the TR/SAMPLER [ CUE ] button, turn on the power.
All TR-S pads and performance pads flash in green.
Use a USB cable to connect the DJ-505 to your computer.
All TR-S pads and performance pads light up in green.
On your computer, open the "Roland" drive.
Copy all files in the "BACKUP" folder to the computer.
When copying is completed, operate your computer to eject the "Roland" drive.
With Windows

Right-click on the "Roland" icon in My Computer and execute "Eject."
With Mac

Drag the "Roland" icon to the Trash icon in the Dock.
Disconnect the USB cable.
All TR-S pads and performance pads return to flashing in green.
Turn off the power to the DJ-505.

Returning to the Factory Settings (Factory Reset)
This returns all system settings, all patterns and kits (instruments) stored in the unit's memory to their factory defaults.

While holding down the [ LOAD ] button in the left side (L channel) of the browser section, and press the [POWER] switch to turn on the power.
The display indicates "FACR" and the [START/STOP] button of the TR-S section blinks.
Press the blinking [ START/STOP] button.
Factory reset begins.
When the display indicates "CPLT" factory reset is complete.
* Never turn off the power until the display indicates "CPLT."
Turn the DJ-505's power off and then on again.

Restore
Here's how to restore the backed-up data from your computer to the DJ-505.

While holding down the TR/SAMPLER [ CUE ] button, turn on the power.
All TR-S pads and performance pads flash in green.
Use a USB cable to connect the DJ-505 to your computer.
All TR-S pads and performance pads light up in green.
On your computer, open the "Roland" drive.
Copy the backup files into the "Roland" drive's "RESTORE" folder.
When copying is completed, operate your computer to eject the "Roland" drive.
With Windows

Right-click on the "Roland" icon in My Computer and execute "Eject."
With Mac

Drag the "Roland" icon to the Trash icon in the Dock.
Disconnect the USB cable.
Wait for all TR-S pads and performance pads to flash in green.
* Never turn off the power until the TR-S pads and performance pads blinking green.
Turn off the power to the DJ-505.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

DJ-505 System Program (Ver.1.10)

支援

Quick Links