Roland - 支援 - FANTOM 8 - 更新&驅動程式 - FANTOM-6/FANTOM-7/FANTOM-8 System Program ( Ver.2.00 )

FANTOM-6/FANTOM-7/FANTOM-8 System Program ( Ver.2.00 )

HOW TO KNOW THE VERSION

Before you start, check the system program version of your FANTOM-6 / FANTOM-7 / FANTOM-8.

Press [ MENU ] to invoke the MENU screen.
Touch < SYSTEM >.
Turn the [ E1 ] FUNCTION knob to select INFO.
The display changes to the INFO screen and the version information is shown.

* If this shows the latest version, there's no need to update your FANTOM-6 / FANTOM-7 / FANTOM-8.

UPDATE HISTORY

[ Ver.2.00 ] SEP 2020
Please refer to the "FANTOM Version 2.00 Supplementary Manual" for detailed information in the [ Owner's Manuals ].

[ Additional Functions ]

KEYBOARD SAMPLE / MULTISAMPLE functions are provided.
A MICROSCOPE EDIT function has been added to the sequencer.
An AUTOMATION function has been added to PIANO ROLL EDIT.
A MARKER function has been added to SCENE CHAIN.
A SWAP function has been added to SCENE CHAIN.
TFX has been added to MAIN BUS.
Input MFX has been added to AUDIO IN.
A ZONE OUT ASSIGN screen has been added.
A WALLPAPER function has been added.

[ Functionality Improvements ]

A display function for the LIST screen has been added to SCENE CHAIN.
COPY, SWAP, and INT functions for SET have been added to SCENE CHAIN.
ZOOM EDIT is now selectable for MFX, IFX, and TFX.
ZOOM EDIT is now selectable for DRUM KIT EDIT.
Five types of ASSIGN parameters have been added to the S1 through S3 buttons.
ADVANCED has been added to ZONE INT/EXT CONTROL.
Transpose settings for each respective ZONE have been added.
KBD SAMPLE is now also selectable in FACTORY RESET, BACKUP, and RESTORE operations.

[ Bug Fix ]
The following bug was fixed.

In SCENE CHAIN, information fails to be displayed correctly when a SCENE is deleted from a SET.

[ Ver.1.60 ] MAY 2020
Please refer to the "FANTOM Version 1.60 Supplementary Manual" for detailed information in the [ Owner's Manuals ].

Support for Sound Content Distributed Via Roland Cloud

Installation of Sound Pack and Wave Expansion distributed through Roland Cloud is supported.
* Sound Pack and Wave Expansion are sound content usable on products equipped with the ZEN-Core Synthesis System.

[ Additional Functions ]

Roland Cloud is now supported.
ZEN-Core SCENE IMPORT and EXPORT functions are provided.
SuperNATURAL Acoustic Piano/Electric Piano expansion sounds (EXSN01 and EXSN02) are now supported.
An LED Brightness function has been provided.
A Zone Sw Indicator function has been provided.

[ Functionality Improvements ]

SCENE DOWN/UP and DEC/INC have been added to the functions assignable to the [S1] [S2] [S3] buttons.
A Wave Tempo Sync parameter has been added to TONE.
An Encoder Speed function has been added.
The PANIC function has been improved. Stopping Samples is also carried out.
PANIC function: Pressing the [SHIFT] + [EXIT] buttons transmits an All Note Off message to all parts.

[ Bug Fixes ]
The following bugs were fixed.

Searching for a SCENE corrupts the display in the PAD MODE window.
Sound is prone to drop-out during ARPEGGIO playback.

[ Ver.1.51 ] MAR 2020

[ Bug Fixes ]
The following bugs were fixed.

When using Master Key Shift, the pitch of SuperNATURAL Acoustic sounds fails to be set correctly.
With certain Scene settings, the unit sometimes fails to start correctly.

[ Ver.1.50 ] JAN 2020
Please refer to the "FANTOM Version 1.50 Supplementary Manual" for detailed information in the [ Owner's Manuals ].

[ Additional Functions ]

ZEN-Core TONE IMPORT and EXPORT functions are provided.
SuperNATURAL Acoustic Strings and Brass are provided in the sound source.
VOCODER is provided in Input FX.
A TONE Raiting function is provided.
A TONE text search function and Rating search function are provided.
Pattern and Variation Play functions are provided in PAD MODE.
A Remote Keyboard Switch function is provided.
An LCD Brightness function is provided.
A USB Memory Unmount function has been added.
AIRA LINK is supported.

[ Functionality Improvements ]

In Piano Roll Edit, it is now possible to select, copy, and work with multiple events in other ways.
In the V-Piano Technology sound engine, Coarse Tune, Fine Tune, and Octave Shift can now be carried out.

[ Ver.1.11 ] DEC 2019

[ Additional Function ]

Batch installation and uninstallation of multiple added tones is now supported.

[ Functionality Improvements ]

The sequencer's PATTERN screen was revised.
The pattern-creation conditions at the Piano Roll screen display were revised.

[ Bug Fixes ]
The following bugs were fixed.

Tone saving
ZONE EQ operations at the MIXER screen
Pad sample play immediately after startup
Normalizing of lengthy samples

[ Ver.1.10 ] OCT 2019
Please refer to the "FANTOM Version 1.10 Supplementary Manual" for detailed information in the [ Owner's Manuals ].

[ Additional Functions ]

A TONE addition function (EXPANSION) was provided.
A PATTERN-EDITING function using the piano roll was added.
A SCENE search function was added.
"ZONE assign" and "PLAYBACK level" functions for the sample pads were added.
A NOISE SUPPRESSOR function was added to the analog filter.
A function for setting the timing of pattern switching was added.
A copy function for TR-REC was added.
A Playback/Stop function for TARGET PATTERNS was added.
A Normalize Function for Sample Editing was added.
An End-Point preview function for WAVE editing was added.
ZEN-Core and System parameters were added.

[ Functionality Improvements ]

Recording at high-resolution velocity during pattern recording is now supported.
The list view displayed when a Tone Name or the like is double-tapped has been improved.
The operation of the TONE CATEGORY buttons at the SCENE SELECT screen has been improved.

[ Bug Fixes ]
The following bugs were fixed.

Operation of the TONE CATEGORY buttons
Knob operation with enable of "Transmit Edit Data"
Problems when importing a Standard MIDI file
Functioning at the time of slider operation

WHAT YOU WILL NEED TO UPDATE

FANTOM-6 / FANTOM-7 / FANTOM-8
USB Memory
* The USB Memory need to be formatted on a FANTOM-6 / FANTOM-7 / FANTOM-8.

GETTING THE UPDATE FILE

Please open/extract the downloaded "fantom678_sys_v200.zip" file on your computer to get the update file in the "fantom678_sys_v200" folder.

PROCEDURE FOR THE UPDATE
Caution

You must not rename the extracted files.
Never turn off the FANTOM-6 / FANTOM-7 / FANTOM-8's power while the update is in progress.

Creating the Update USB Memory

Copy all files inside the "fantom678_sys_v200" folder to the USB flash memory's root directory (the level displayed immediately after opening the device).

Update Procedure

Connect the USB Memory to the USB MEMORY port.
Hold down the [ WRITE ] button and turn on the power.
The message "preparing for update..." appears at the top of the display, and the initial update starts.
* Continue to hold down the [ WRITE ] button until "preparing for update..." appears on the display.
* The update operation takes about 2 minutes.
After confirming that the message "Update (board1) End..." has been displayed, detach the USB flash memory without turning off the power.
* Do not turn off the power.
Connect the USB flash memory to any one of the EXT DEVICE jacks (1, 2, or 3).
The message "Running Update..." appears at the bottom of the display, and the update starts again.
* The update requires about 5 minutes.
After confirming that the message "Update (board2) End..." has been displayed, turn off the power.
Detach the USB Memory from the FANTOM-6 / FANTOM-7 / FANTOM-8.

This completes the update operation. The new system program runs at the next startup.
Follow the procedure for verifying the version to verify that the version has been updated.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

FANTOM-6/FANTOM-7/FANTOM-8 System Program ( Ver.2.00 )

支援

Quick Links