Roland - 支援 - FP-80 - 更新&驅動程式 - FP-80 System Program Version 1.24

FP-80 System Program Version 1.24

This system program updates your FP-80 to the latest version 1.24.

How to know the version

Before you start, check the system program version of your FP-80.

Hold down [ + ] and [ - ] and switch on the power to the unit.
If this shows the latest version (version 1.24 or later), there's no need to update your FP-80.
After verifying the displayed version, switch off the power.

Update history
[ Ver.1.24 ]

Bug Fix
Following bug was fixed.

Increasing the tempo was impossible when the metronome beat was set to "3/8" while Rhythm was selected (the [ RHYTHM ] button is lit).

[ Ver.1.23 ]

Bug Fix
Following bug was fixed.

At Ver.1.22 of FP-80, the PIANO tone might sound loud than it should be.

[ Ver.1.22 ]

Additional Functions

A "Loading/Saving Piano Setups" function was added.
Support for the "Piano Designer" Android application was added.
Support for the "Piano Designer" iOS application was added.
Piano Designer parameters "Note Volume" and "Note Character" were added.

[ Ver.1.10 ]

Additional Functions

Support for the "Piano Partner" iOS application was added.
Added two functions of "Master Expression" and "Rotary Sw" into "Changing the Function of the Pedal ( Center Pedal Function/Left Pedal Function )"

What you will need to update your FP-80

FP-80
USB Memory ( Roland's M-UF1G or M-UF2G is recommended )
* The USB Memory need to be formatted on a FP-80.
A computer with a USB connector (Windows ,Mac)
Update file downloaded from this page

Cautions with the update

Executing an update causes items stored by memory backup and registration settings to be reset to their factory defaults.
* Song data and registration sets saved in internal memory are not lost.
- Refer to the owner's manual to make a note of the settings.
  - Items Stored by Memory Backup ( Owner's Manual, p.57 )
  - Settings Stored Immediately When Edited ( Owner's Manual, p.57 )
- Refer to the owner's manual to save in internal memory or USB memory device.
  - Registration sets saved to buttons ( Owner's Manual, p.37, p.57 )
Never power-off your FP-80 while the update is in progress!
If a power failure or similar accident occurs during the update process, the FP-80 won't be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Getting the update file

Please open/extract the downloaded "fp80_sys_v124.zip" file on your computer to get the update files in the "R051_FP80" folder.

Procedure for the update

Copy the entire folder containing the FP-80 update data ( R051_FP80 ) to the root directory of the formatted USB Memory, and then detach the device from the computer.
Leaving the power to the FP-80 switched off; connect the USB Memory to the USB MEMORY port.
Hold down [ REC ] and switch on the power to the unit.
Please wait for about ten seconds until displaying "Loading..."
The update starts. Wait several minutes. When "Completed." is displayed, the operation is finished.
Detach the USB Memory and switch off the power to the unit.
Switch on the power to the unit.
Press [ SONG ] and [ RHYTHM ] at the same time to enter the Function Mode.
Use [ SLOW ] and [ FAST ] to select Factory Reset.
Press [ METRONOME ].
To execute the factory reset, press [ FAST ].
To cancel, press [ SLOW ].
Pressing [ FAST ] executes the factory reset. When the factory reset is finished, the message Power off, then on. is displayed.
* Be very sure never to switch off the power while the message "Executing..." is displayed.
Reset the power.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

FP-80 System Program Version 1.24

支援

Quick Links