Roland - 支援 - FP-E50 - 更新&驅動程式 - FP-E50 System Program (Ver.1.11)

FP-E50 System Program (Ver.1.11)

How to know the version
Before you start, check the system program version of your FP-E50.

Press the [ Menu ] button.
Press the [ ∨ ] button and select "Information."
Press the [ Enter ] button.
The version information is displayed.
If this shows the latest version (version 1.11 or later), there's no need to update your FP-E50.
Press the [ Exit ] button.

Update history
[ Ver.1.11 ] MAY 2023

Bug Fixes
The following bugs were fixed.

USB Audio IN was sent back to USB Audio OUT.
Mic FX Volume went low when powering on with the "Keyboard" slider turned down.
Proper message and error number did not appear when an error occurred.
Warning message did not appear when you rename Song with an invalid name on.
Style Pack names were not proper.
Minor bugs have been fixed.

[ Ver.1.10 ] JAN 2023

Additional Functions

The Roland Cloud Contents is now supported.
"The " Sound Pack ", " Style Pack ", " Wave Expansion ", Roland Cloud content item is now supported (non-free)."
Preset Style have been added.
Chord pattern have been enable to edit in "Chord Sequencer".
"User License" have been enable to delete in "Factory Reset"

Bug Fixes
The following bugs were fixed.

Adjusting "Mic Effect" volume was assigned to "Keyboard" slider.
If you stop the accompaniment while playing Fill down or Fill up, the Variation LED kept flashing
Minor bugs have been fixed.

What you will need to update your FP-E50

FP-E50
USB Memory
* The USB Memory need to be formatted on a FP-E50 or formatted to FAT32 or MS-DOS(FAT) on a computer in advance.
A computer with a USB connector ( Windows, Mac )
Update file downloaded from this page

Cautions with the update

When first power-on after the update from Ver1.01, initialize operation takes about 30 seconds.
It is not failure that takes a long time to first start up.
We recommend that you save your user data to a USB memory before you perform the update. If a problem occurs and your user data is lost, you will be able to restore the original state by reloading the data you saved. For details on the procedure, refer to the following sections of the Owner's Manual.
- Initializinga USB Flash Drive(Format USB Memory)
- Backing Up Settings to USB Flash Drive (Backup)
- Loading a Backup File into This Instrument (Restore)
Never power-off your FP-E50 while the update is in progress!
If a power failure or similar accident occurs during the update process, the won't be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Getting the update file

It is an archive file in zip format, please double click on the file to expand. After expanding the file, the folder "fpe50_sys_v111" holding the file "R082_UPA.BIN" will be appeared.

Procedure for the update

Creating the Update USB Memory

Copy update files R082_UPA.BIN to the root directory of a USB Memory.

Update Procedure

Connect the USB Memory to the USB memory port on the instrument.
Hold down the [ Mic Fx ] button and turn on the power to the instrument.
The message " ===update=== " appears on the display, and the update operation starts.
* Continue to hold down the [ Mic Fx ] button until " ===update=== " appears on the display.
When the message " ===update finished.=== " appears, the update operation has finished.
* The update operation takes about 5 minutes.
Press and hold the power button to turn off the power.
Detach the USB Memory from the instrument.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

FP-E50 System Program (Ver.1.11)

支援

Quick Links