Roland - 支援 - JUPITER-X - 更新&驅動程式 - JUPITER-X System Program (Ver.1.20)

JUPITER-X System Program (Ver.1.20)

HOW TO KNOW THE VERSION

Before you start, check the system program version of your JUPITER-X.

Press [ MENU ] to invoke the MENU screen.
Use the [ 1 ] knob or the [ PAGE ] button to select INFORMATION, then press the [ ENTER ] button.
The version information screen appears.

* If this shows the latest version, there's no need to update your JUPITER-X.

UPDATE HISTORY

[ Ver.1.20 ] MAR 2020
Please refer to the "JUPITER-X Owner's Manual" for detailed information in the [ Owner's Manuals ].
Additional Functions / Functionality Improvements

In the operations in "Editing the Sound (TONE EDIT)," it is now possible to edit multiple parts simultaneously.
This is also available during performances.
Key Transpose for a pattern input using the STEP EDIT function is now possible by keyboard operation.
( ARP PART EDIT > STEP MODE: KEYSHIFT )
Added the function (L / R Dual) to operate Pan of Part 1 and Part2 at the same time during Dual performance.
( [SHIFT] + [DUAL] )
A function for copying parameters between partials on Partial-equipped Models (other than Analog Synthesizers and VOCODER) has been added.
(Display the copy-source Partial screen, then use the [SHIFT] + [WRITE] + copy-destination Partial button)
A screen displaying all key ranges of each part (KEY RANGE SETTINGS) has been added to the MENU screen.
This is convenient when making settings for split sounds in combination with I-ARPEGGIO.
A function for assigning the number of the Scene to recall at unit startup (Startup Scene) has been added.
( SYSTEM > GENERAL Startup Scene )
A function that produces a warning so as to prevent unintended Scene changes (Scene Lock) has been added.
( SYSTEM > GENERAL Scene Lock )
In the STEP EDIT function, it is now possible to input the end point of a Tie by pressing the [SHIFT] + [1] ~ [16] buttons when the cursor is over the note where you want to input the Tie.
The MIDI channel can be set for each Parts.
( SCENE PART EDIT > MIDI Rx Ch )
* Along with this specification change, "MIDI Basic Ch" has been removed from [SYSTEM].
A setting function (USB Audio Thru) for mixing USB Audio In with USB Audio Output has been added.
( SYSTEM > GENERAL USB Audio Thru )
A setting function (AUXIN USB Thru) for mixing AUX IN or Bluetooth into USB Audio Output has been added.
( SYSTEM > GENERAL AUXIN USB Thru )
A key lock function has been added to the [ PART ] button.
Pressing and holding the [ PART ] button makes the button flash and engages Key Locking.
The operation while pressing the [PART] button can be operated by releasing the [PART] button.

Removed Function

The function for setting KEY TRANSPOSE using the keyboard while holding down the [ TRANSPOSE ] button has been removed.
* This avoids unintended changes in the KEY TRANSPOSE value when working with the [ TRANSPOSE ] button.

Tone Fixes

The tones produced when the [UNISON] button is set to "on" while using an Analog Synthesizer MODEL were not as intended; this has been corrected.
In connection with this, the parameter that changes when the [UNISON] and [MONO] buttons are pressed has been changed from "PART" to "TONE."
For RD-PIANO's Preset Tones, the changes in tone due to the intensity of velocity have been adjusted.
The Controller Assign settings for some preset scenes have been revised.
(The JUPITER-X is updated with the revised settings when the operation in "Returning to the Factory Settings (Factory Reset)" is carried out.)
* Returning settings to their factory-default value initializes all settings. Before returning the unit to its factory defaults, be sure to use the backup function to save the current settings.

Bug Fixes
The following bugs were fixed.

Minor bugs have been fixed.

WHAT YOU WILL NEED TO UPDATE

JUPITER-X
USB Memory
* The USB Memory need to be formatted on a JUPITER-X.

GETTING THE UPDATE FILE

Download the file named "jupiterx_sys_v120.zip".
Please open/extract the downloaded "jupiterx_sys_v120.zip" file on your computer to get the update file in the "jupiterx_sys_v120" folder.

PROCEDURE FOR THE UPDATE

Creating the Update USB Memory

Copy update files MI077_UPA_up.bin to the root directory of a USB Memory.

Update Procedure

Connect the USB Memory to the USB MEMORY port.
Hold down the [ WRITE ] button and turn on the power.
The message " JUPITER Updater... " appears on the display, and the update operation starts.
* Continue to hold down the [ FUNCTION ] button until " JUPITER Updater... " appears on the display.
When the message " Please power off " appears, the update operation has finished.
* The update operation takes about 2 minutes.
Press the power button to turn off the power.
Detach the USB Memory from the JUPITER-X.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

JUPITER-X System Program (Ver.1.20)

支援

Quick Links