Support

JUPITER-Xm System Program (Ver.1.21)


HOW TO KNOW THE VERSION
Before you start, check the system program version of your JUPITER-Xm.
  1. Press [ MENU ] to invoke the MENU screen.
  2. Use the [ 1 ] knob or the [ PAGE ] button to select INFORMATION, then press the [ ENTER ] button.
    The version information screen appears.
* If this shows the latest version, there's no need to update your JUPITER-Xm.
* If the current version is 1.01 or earlier, upgrading using this updater is not possible. Please consult the Customer Center.

UPDATE HISTORY
[ Ver.1.21 ] MAY 2020
Support for Sound Content Distributed Via Roland Cloud
Installation of Sound Pack and Wave Expansion distributed through Roland Cloud is supported.
* Sound Pack and Wave Expansion are sound content usable on products equipped with the ZEN-Core SYNTHESIS SYSTEM.

Additional Function
  • EXZ and SDZ Download Content is now supported.
    Please refer to the "JUPITER-X/Xm SOUND PACK/WAVE EXPANSION Install Manual" for detailed information in the [ Owner's Manuals ].
Bug Fixes
The following bugs were fixed.
  • Minor bugs have been fixed.

[ Ver.1.20 ] MAR 2020
Please refer to the "JUPITER-Xm Owner's Manual" for detailed information in the [ Owner's Manuals ].
Additional Functions / Functionality Improvements
  • In the operations in "Editing the Sound (TONE EDIT)," it is now possible to edit multiple parts simultaneously.
    This is also available during performances.
  • Key Transpose for a pattern input using the STEP EDIT function is now possible by keyboard operation.
    ( ARP PART EDIT > STEP MODE: KEYSHIFT )
  • Added the function (L / R Dual) to operate Pan of Part 1 and Part2 at the same time during Dual performance.
    ( [SHIFT] + [DUAL] )
  • A function for copying parameters between partials on Partial-equipped Models (other than Analog Synthesizers and VOCODER) has been added.
    (Display the copy-source Partial screen, then use the [SHIFT] + [WRITE] + copy-destination Partial button)
  • A screen displaying all key ranges of each part (KEY RANGE SETTINGS) has been added to the MENU screen.
    This is convenient when making settings for split sounds in combination with I-ARPEGGIO.
  • A function for assigning the number of the Scene to recall at unit startup (Startup Scene) has been added.
    ( SYSTEM > GENERAL Startup Scene )
  • A function that produces a warning so as to prevent unintended Scene changes (Scene Lock) has been added.
    ( SYSTEM > GENERAL Scene Lock )
  • In the STEP EDIT function, it is now possible to input the end point of a Tie by pressing the [SHIFT] + [1] ~ [16] buttons when the cursor is over the note where you want to input the Tie.
  • The MIDI channel can be set for each Parts.
    ( SCENE PART EDIT > MIDI Rx Ch )
    * Along with this specification change, "MIDI Basic Ch" has been removed from [SYSTEM].
  • A setting function (USB Audio Thru) for mixing USB Audio In with USB Audio Output has been added.
    ( SYSTEM > GENERAL USB Audio Thru )
  • A setting function (AUXIN USB Thru) for mixing AUX IN or Bluetooth into USB Audio Output has been added.
    ( SYSTEM > GENERAL AUXIN USB Thru )
Removed Function
  • The function for setting KEY TRANSPOSE using the keyboard while holding down the [ TRANSPOSE ] button has been removed.
    * This avoids unintended changes in the KEY TRANSPOSE value when working with the [ TRANSPOSE ] button.
Tone Fixes
  • The tones produced when the [UNISON] button is set to "on" while using an Analog Synthesizer MODEL were not as intended; this has been corrected.
    In connection with this, the parameter that changes when the [UNISON] and [MONO] buttons are pressed has been changed from "PART" to "TONE."
  • For RD-PIANO's Preset Tones, the changes in tone due to the intensity of velocity have been adjusted.
  • The Controller Assign settings for some preset scenes have been revised.
    (The JUPITER-Xm is updated with the revised settings when the operation in "Returning to the Factory Settings (Factory Reset)" is carried out.)
    * Returning settings to their factory-default value initializes all settings. Before returning the unit to its factory defaults, be sure to use the backup function to save the current settings.
Bug Fixes
The following bugs were fixed.
  • Minor bugs have been fixed.

[ Ver.1.10 ] JAN 2020
Additional Functions / Functionality Improvements
  • The ZEN-Core Tone Import function is supported (MENU > UTILITY > IMPORT TONE).
  • SYSTEM > AGING parameters were organized and added.
  • The STEP EDIT function supports the TR-REC input method.
    Also, a pattern created using STEP EDIT can now be played as part of an arpeggio immediately after exiting STEP EDIT.
  • A Keyboard Input Range was added to I-ARPEGGIO. A lead can be played with the right-hand while playing an arpeggio with the left.
  • Interlinking with Apple MainStage is supported.
  • AIRA LINK is supported.
    Audio and MIDI connections to the AIRA MIXER MX-1 can be made using a single USB cable.
  • An Arp Sync function was added to I-ARPEGGIO (MENU > SYSTEM > ARPEGGIO).
    Playing with I-ARPEGGIO's beat or measures synced to an external sequencer is now possible.
  • Drive Sw, Part Level, and AGE were added to controller assignments for SL1, SL2, and the like.
  • The functionality of the [1] through [10] buttons can now be customized when in the PART mode.
  • PITCH, FILTER, and AMP settings for ENVELOPE and LFO can now each be made independently using the panel even during tone play for models other than JUPITER, JUNO, JX, and SH.
  • It is now possible to change the MODEL and CATEGORY by direct cursor movement using the cursor buttons at the MODEL BANK screen.
  • It is now possible to switch TRANSPOSE ON or OFF using the TRANSPOSE button.
  • TONEs were added.
  • Some SCENE settings were changed to support new parameters.
Bug Fixes
The following bugs were fixed.
  • SCENE COMMON > VOICE RSRV failed to function.
  • When multiple categories have been arranged using MODEL BUTTON ASSIGN, only the first category is selectable (version 1.03).
  • The screen sometimes changes to the wrong display when a control is operated while holding down the [ SHIFT ] button.
  • Other minor bugs.

[ Ver.1.03 ] NOV 2019
  • The Aging function, by which the sound changes according to the unit's internal temperature, has been improved.
    • The change in sound when Aging is set to ON was modified to change in a more analog manner.
    • The [MENU] > Information screen now displays the unit's internal temperature.
    • When Aging is set to ON, the SCENE screen now displays the virtual internal temperature.
    • An Aging Initial Temperature parameter for virtually simulating the unit's initial internal temperature was added to the SYSTEM parameters.
    • Operation when the assignment feature's AUTO TUNING function is set to ON was modified to change in a more analog manner.
  • Portment Curve was added to the TONE parameters for the JUPITER, JUNO, JX, and SH models.
  • Icons are now used to indicate parts on the display. The display was improved to enable setting status to be understood at a glance.
  • Shortcuts to the respective editing pages were added to the MENU screen.
  • Other minor bug fixes and improvements in functionality were made.

WHAT YOU WILL NEED TO UPDATE
  • JUPITER-Xm
  • USB Memory
    * The USB Memory need to be formatted on a JUPITER-Xm.

GETTING THE UPDATE FILE
Download the file named "jupiterxm_sys_v121.zip".
Please open/extract the downloaded "jupiterxm_sys_v121.zip" file on your computer to get the update file in the "jupiterxm_sys_v121" folder.

PROCEDURE FOR THE UPDATE
Creating the Update USB Memory
  1. Copy update files KY023_UPA_up.bin to the root directory of a USB Memory.

Update Procedure
  1. Connect the USB Memory to the USB MEMORY port.
  2. Hold down the [ FUNCTION ] button and turn on the power.
    The message " JUPITER Updater... " appears on the display, and the update operation starts.
    * Continue to hold down the [ FUNCTION ] button until " JUPITER Updater... " appears on the display.

  3. When the message " Please power off " appears, the update operation has finished.
    * The update operation takes about 2 minutes.
  4. Press the power button to turn off the power.
    Detach the USB Memory from the JUPITER-Xm.

  5. This completes the update operation. The new system program runs at the next startup.
    Follow the procedure for verifying the version to verify that the version has been updated.

支援

Quick Links