---

Please refer to the document "OCTA-CAPTURE Version 1.5 Functions (OCTA-CAPTURE_v1.5_Functions_e02_W.pdf)" which describes the update procedure and the Version 1.5 Functions.

[IMPORTANT NOTICE]
When you use the OCTA-CAPTURE Version 1.51, you MUST use the latest driver (Ver.1.5.0 or later).
When you use it with the VS-100/VS-700, you MUST refer to the document "I/O Expansion by using the OCTA-CAPTURE with the VS-100/VS-700."

---

Checking the Version

---

Features of OCTA-CAPTURE Version 1.5

• The control panel is more graphical, allowing intuitive operation.
• The AUTO-SENS function can be operated from the control panel.
• The latency with ASIO has been reduced even further.
• The operating sample rate can be changed from within your DAW application.

---

Version history

---

What you will need to update your OCTA-CAPTURE

• OCTA-CAPTURE
• USB cable
• A computer with a USB connector ( Windows, Mac OS X )

---

Caution when performing the update

• Never apply this update data to any product other than the OCTA-CAPTURE. This update data may destroy the data or system program of other products.
• Never power-off your OCTA-CAPTURE while the update is in progress!
  If a power failure or similar accident occurs during the update process, the OCTA-CAPTURE won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
• We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

---

Getting the update file

• Please open/extract the downloaded “octa_sys_v151.zip” file on your computer to get the update files named “UpdOcta.dat” in the “octa_sys_v151” folder.

---

Procedure for the update
Refer to the "OCTA-CAPTURE Version 1.5 Functions" ( OCTA-CAPTURE_v1.5_Functions_e02_W.pdf ).

---