Roland - 支援 - RD-2000 - 更新&驅動程式 - RD-2000 System Program (Ver.1.51)

RD-2000 System Program (Ver.1.51)

How to know the version

Before you start, check the system program version of your RD-2000.

Press [ MENU ] to invoke the Menu screen.
Use the cursor buttons to select SYSTEM, then press the [ ENTER ] button.
Use the cursor buttons to select the INFORMATION tab.
The current version is shown on the display.
If this shows the latest version (version 1.51 or later), there's no need to update your RD-2000.
After verifying the displayed version, switch off the power.

Update history
[ Ver.1.51 ] OCT 2020

Bug Fixes
The following bugs were fixed.

During RD-EXP05 play, DRAWBAR operation changes the speed of the rotary effect.
When the ZONE receives a specific System Exclusive Message (RQ1), the effect settings are initialized.
System Exclusive Messages for V-Piano Piano Designer and V-Piano Individual Voicing are not applied correctly.
No acknowledgement screen is displayed when a System Exclusive Message for a rhythm pattern or effect setting is received.

[ Ver.1.50 ] MAR 2018

Please refer to the "RD-2000 Version 1.50 Supplementary Manual" for detailed information in the [ Owner's Manuals ].

Additional Functions

"V-Piano Technology" tones were added.
"Startup Mode" was added to the setting parameters.
"Slider Mode" was added to the setting parameters.
"ROTARY Type2" was added to the Tremolo/Amp Simulator types.
Support was added for Axial RD-EXP05 / RD-EXP06 importing.

Functionality Improvements

Remote control of the Organ Harmonics bar and Percussion via Control Change messages from an external MIDI device is now possible.

Bug Fixes
The following bugs were fixed.

The pitch is not set to the correct value when KIRNBERGER is selected for Temperament.
When Internal control is performed using knobs, the LED indicator fails to indicate the changed value.

[ Ver.1.03 ] JUN 2017

Functionality Improvement

The Auto Off function was improved.

Bug Fix
The following bug was fixed.

When a PROGRAM or SCENE is switched, the respective ZONE setting values sometimes fail to persist.

[ Ver.1.02 ] MAR 2017

Additional Function

Support was added for Axial RD-EXP series importing (to be available in April).

Functionality Improvements

Support was added for importing multiple programs by specifying a range.
Support was added for SCENE UP/DOWN in "Assigning Functions to Pedals."
A Program Display Size parameter supporting expanded display of programs was added to Setting Parameters (System).
When a tone or program is registered in a Scene, the number and name are input into MEMO.

Bug Fixes
The following bugs were fixed.

Latency might be occured during performance when sending a control change message to the internal sound generator.
Button illumination was reversed when BEND UP or DOWN was assigned to ASSIGN 9.
When Control Destination = PROGRAM was in effect, knob operation sometimes had no effect.

What you will need to update your RD-2000

RD-2000
USB Memory ( Roland's M-UF1G or M-UF2G )
* The USB Memory need to be formatted on a RD-2000.
A computer with a USB connector ( Windows, Mac )
Update file downloaded from this page

Cautions with the update

We recommend that you back up to a USB memory before you perform the update although RD-2000 keeps the data with normal updating.
Refer to the following section from the Owner's Manual for the detailed procedure.
- Backing Up RD-2000 Data to a USB Flash Drive (Backup Save)
Never apply this update data to any product other than the RD-2000. This update data may destroy the data or system program of other products.
Never power-off your RD-2000 while the update is in progress!
If a power failure or similar accident occurs during the update process, the RD-2000 won't be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Getting the update file

Please open/extract the downloaded "rd2000_sys_v151.zip" file on your computer to get the update files in the "rd2000_sys_v151" folder.

Procedure for the update

Creating the Update USB Memory

Copy update files RD2000_UPA.BIN to the root directory of a USB Memory.

Update Procedure

Make sure the unit's power is switched off, then connect the USB memory device into the USB MEMORY port.
Hold down [ WRITE ] and switch on the power to the unit.
When the message "start update." appears, release the button.
The update starts.
When the message " <<< Please POWER OFF >>> " appears, the system update has finished.
* You will take about five minutes to update.
* Never switch off the power or detach the USB memory device until the message " <<< Please POWER OFF >>> " appears. Doing so may damage the unit.
Switch off the unit and detach the USB memory device.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

RD-2000 System Program (Ver.1.51)

支援

Quick Links