Support

RD-2000 System Program ( Ver.2.00 )


HOW TO KNOW THE VERSION
Before you start, check the system program version of your RD-2000.
  1. Press [ MENU ] to invoke the Menu screen.
  2. Use the cursor buttons to select SYSTEM, then press the [ ENTER ] button.
  3. Use the cursor buttons to select the INFORMATION tab.
  4. The current version is shown on the display.
    If this shows the latest version (version 2.00 or later), there's no need to update your RD-2000.
  5. After verifying the displayed version, switch off the power.

UPDATE HISTORY
[ Ver.2.00 ] OCT 2022
Additional Function
  • The "V-Piano Expansion" Roland Cloud content item is now supported (non-free).
    Please refer to the "RD-2000 Roland Cloud V-Piano Expansion User's Guide" for detailed information in the [ Owner's Manuals ].

[ Ver.1.52 ] JUL 2022
  • The version number was updated due to production-related circumstances.
    Product specifications are unaffected.

[ Ver.1.51 ] OCT 2020
Bug Fixes
The following bugs were fixed.
  • During RD-EXP05 play, DRAWBAR operation changes the speed of the rotary effect.
  • When the ZONE receives a specific System Exclusive Message (RQ1), the effect settings are initialized.
  • System Exclusive Messages for V-Piano Piano Designer and V-Piano Individual Voicing are not applied correctly.
  • No acknowledgement screen is displayed when a System Exclusive Message for a rhythm pattern or effect setting is received.

[ Ver.1.50 ] MAR 2018
Please refer to the "RD-2000 Version 1.50 Supplementary Manual" for detailed information in the [ Owner's Manuals ].

Additional Functions
  • "V-Piano Technology" tones were added.
  • "Startup Mode" was added to the setting parameters.
  • "Slider Mode" was added to the setting parameters.
  • "ROTARY Type2" was added to the Tremolo/Amp Simulator types.
  • Support was added for Axial RD-EXP05 / RD-EXP06 importing.
Functionality Improvements
  • Remote control of the Organ Harmonics bar and Percussion via Control Change messages from an external MIDI device is now possible.
Bug Fixes
The following bugs were fixed.
  • The pitch is not set to the correct value when KIRNBERGER is selected for Temperament.
  • When Internal control is performed using knobs, the LED indicator fails to indicate the changed value.

[ Ver.1.03 ] JUN 2017
Functionality Improvement
  • The Auto Off function was improved.
Bug Fix
The following bug was fixed.
  • When a PROGRAM or SCENE is switched, the respective ZONE setting values sometimes fail to persist.

[ Ver.1.02 ] MAR 2017
Additional Function
  • Support was added for Axial RD-EXP series importing (to be available in April).
Functionality Improvements
  • Support was added for importing multiple programs by specifying a range.
  • Support was added for SCENE UP/DOWN in "Assigning Functions to Pedals."
  • A Program Display Size parameter supporting expanded display of programs was added to Setting Parameters (System).
  • When a tone or program is registered in a Scene, the number and name are input into MEMO.
Bug Fixes
The following bugs were fixed.
  • Latency might be occured during performance when sending a control change message to the internal sound generator.
  • Button illumination was reversed when BEND UP or DOWN was assigned to ASSIGN 9.
  • When Control Destination = PROGRAM was in effect, knob operation sometimes had no effect.

WHAT YOU WILL NEED TO UPDATE YOUR RD-2000
  • RD-2000
  • USB Memory
    * The USB Memory need to be formatted on a RD-2000.
  • A computer with a USB connector ( Windows, Mac )
  • Update file downloaded from this page

CAUTIONS WITH THE UPDATE
  • We recommend that you back up to a USB memory before you perform the update although RD-2000 keeps the data with normal updating.
    Refer to the following section from the Owner's Manual for the detailed procedure.
    • Backing Up RD-2000 Data to a USB Flash Drive (Backup Save)
  • Never apply this update data to any product other than the RD-2000. This update data may destroy the data or system program of other products.
  • Never power-off your RD-2000 while the update is in progress!
    If a power failure or similar accident occurs during the update process, the RD-2000 won't be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
  • We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

GETTING THE UPDATE FILE
Please open/extract the downloaded "rd2000_sys_v200.zip" file on your computer to get the update files in the "rd2000_sys_v200" folder.

PROCEDURE FOR THE UPDATE
Creating the Update USB Memory
  1. Copy update files RD2000_UPA.BIN to the root directory of a USB Memory.

Update Procedure
  1. Make sure the unit's power is switched off, then connect the USB memory device into the USB MEMORY jack.
    * The RD-2000 is equipped with multiple USB ports. When updating, use the USB MEMORY jack.
  2. Hold down [ WRITE ] and switch on the power to the unit.
  3. When the message "start update." appears, release the button.
    The update starts.
    When the message " <<< Please POWER OFF >>> " appears, the system update has finished.
    * You will take about five minutes to update.
    * Never switch off the power or detach the USB memory device until the message " <<< Please POWER OFF >>> " appears. Doing so may damage the unit.
  4. Switch off the unit and detach the USB memory device.

支援

Quick Links