Roland - 支援 - RD-700NX - 更新&驅動程式 - RD-700NX System Update Version 2.02

RD-700NX System Update Version 2.02

This system program updates your RD-700NX to the latest version 2.02.

How to know the version

Before you start, check the system program version of your RD-700NX.

Hold down [ V-LINK ] and switch on the power.
If this shows the latest version (version 2.02 or later), there’s no need to update your RD-700NX.
After verifying the displayed version, switch off the power.

Update history
[ Ver.2.02 ]

Bug Fix
The following bug is fixed.

It might rarely not stop sounds on the specified setting and playing style.

[ Ver.2.01 ]

Bug Fix
The following bug is fixed.

It interrupts the sounds when you perform a piano sound with playing Fast Bossa rhythms.

[ Ver.2.00 ]

Additional Functions

Added Live Sets
- Fifty new Live Sets, featuring synth sounds that are sure to give you a distinctive advantage when performing live on stage, have been added to the Preset bank.
- Thanks to the addition of 100 new slots to the User banks, you can now save up to 200 Live Sets.
Available for Roland Wireless Connect ( WNA1100-RL ).

* For more information, refer to "RD-700NX/RD-300NX Version 2 Supplementary Manual ( RD-700NX_RD-300NX_V200_e01_W.pdf )."
* To view a list of the Live Sets, please refer to "RD-700NX Version 2 Live Set List ( RD-700NX_V200_List_je01.pdf )."

[ Ver.1.04 ]

Bug Fix

The "System V-Link" and the "System Switch Assign" of System Exclusive message had been misaddressed.
The faults were in both RD-700NX itself and the MIDI implementation.
You can download the latest PDF file of the MIDI implementation from the Download page for Owner's manuals.

Functionality Improved

Added the parameter "Clock Out" in "System Settings."
This parameter can control ON/OFF setting for transmitting the F8(Timing Clock) message. RD-700NX had transmitted it at any time.

[ Ver.1.03 ]

Alleviated the feelings of the tone interruption when performing with layered tones using combinations of Piano and Strings.
The following bug is fixed.
- When receiving the Data Request (RQ1) messages of the System Exclusive messages, the requested data was not output.

What you will need to update your RD-700NX

RD-700NX
USB Memory ( Roland's M-UF2G is recommended )
* The USB Memory need to be formatted on a RD-700NX.
A computer with a USB connector (Windows XP/Vista/7, MacOS X v10.4.3 or later)
Update file downloaded from this page

Cautions with the update

When you perform this update, it will initialize your Live Set that was saved in the User bank.
You should save the Live Set on a USB memory before you perform the update.
Refer to the following section from the Owner's Manual for the detailed procedure.
- Saving a Live Set File ( LIVE SET Save )
Call up the Live Set from the USB memory after the update completes.
We recommend that you back up your Live Set files and Songs stored in the internal memory to a USB memory before you perform the update although RD-700NX keeps the data with normal updating.
Refer to the following section from the Owner's Manual for the detailed procedure.
- Copying a Live Set File ( LIVE SET Copy )
- Copying a Song (SONG Copy)
Never apply this update data to any product other than the RD-700NX. This update data may destroy the data or system program of other products.
Never power-off your RD-700NX while the update is in progress!
If a power failure or similar accident occurs during the update process, the RD-700NX won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Getting the update file

Please open/extract the downloaded “rd700nx_sys_v202.zip” file on your computer to get the update files in the “R028_RD700NX” folder.

Procedure for the update

Copy the entire folder containing the RD-700NX update data (R028_RD700NX) to the root directory of the formatted USB Memory, and then detach the device from the computer.
Leaving the power to the RD-700NX switched off; connect the USB Memory to the USB MEMORY port.
Hold down [MENU] and [WRITE] and switch on the power to the unit. The update starts. Wait several minutes. When “Completed.” is displayed, the operation is finished.
* Never switch off the power or detach the USB Memory before Completed. Is displayed. Doing so may damage the USB Memory and make it unusable.
Detach the USB Memory and switch off the power to the unit.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

RD-700NX System Update Version 2.02

支援

Quick Links