Roland - 支援 - RD-800 - 更新&驅動程式 - RD-800 System Update Version 1.04

RD-800 System Update Version 1.04

This system program updates your RD-800 to the latest version 1.04.

How to know the version

Before you start, check the system program version of your RD-800.

Hold down [ DEC ] and [ INC ] and switch on the power to the unit.
If this shows the latest version (version 1.04 or later), there’s no need to update your RD-800.
After verifying the displayed version, switch off the power.

Update history
[ Ver.1.04 ]

Additional Functions

A numeric-keypad input function was added to Tone selection and Live Set selection.
For the operation procedures, refer to "Operation Guide --- Selecting Sounds (Tone/Live Set)" in the Owner's Manual or the last "Supplementary file" entry, "RD-800 Version 1.04 Supplementary Manual" in the [ Owner's Manuals ].
Support was added for the ONKYO UWF-1 Wireless USB Network Adapter.

Bug Fixes
The following bugs were fixed.

In Tone number 0367, "PizzicatoStr," the notes in some keyboard ranges were played as monaural sounds.
In the respective effect parameters for Modulation FX, Tremolo/Amp Simulator, and Delay, when syncing to rhythm tempo, increasing the tempo resulted in sudden slowing of synced tempo.
When making a USB MIDI connection to the RD-800 using RD Driver, selecting the "Reduce computer load" check box in the setup dialog box on the computer made correct connection impossible.
When making a USB MIDI connection to the RD-800 using RD Driver, correct connection was impossible in some Windows 8.1 computer environments.

[ Ver.1.03 ]

Internal processing has been improved.
* There is no change affecting the product specification.

[ Ver.1.02 ]

Bug Fixes
The following bugs were fixed.

The volume balance between the percussion sound and the sound of the harmonic bars might not be adjusted properly depending on the set values (Soft/Normal) of Percussion Volume for a TW-Organ sound.
When a TW-Organ sound is used in multiple layers and the tone is switched, you might not be able to adjust the volume of the TW-Organ sound.
Sympathetic Resonance might not work in a layer (LOWER).
When a rhythm is switched, MIDI data such as a program number and Bank Select is transmitted.
When CC1 (User Control Change 1 Number) or CC2 (User Control Change 2 Number) is switched on the MIDI Control screen, control change messages are transmitted.
When "ALL" is selected to copy all Live Set files using the Live Set File Copy function and another Live Set file with the same name as any of the copy sources exists in the copy destination, the file is overwritten without confirmation.
Other minor bugs have been fixed.

What you will need to update your RD-800

RD-800
USB Memory ( Roland's M-UF1G or M-UF2G is recommended )
* The USB Memory need to be formatted on a RD-800.
A computer with a USB connector ( Windows, Mac )
Update file downloaded from this page

Cautions with the update

We recommend that you back up to a USB memory before you perform the update although RD-800 keeps the data with normal updating.
Refer to the following section from the Owner's Manual for the detailed procedure.
- Saving System Settings
- Saving the Sound Settings in a Live Set (Live Set Write)
- Copying a Live Set File (Live Set File Copy)
Never apply this update data to any product other than the RD-800. This update data may destroy the data or system program of other products.
Never power-off your RD-800 while the update is in progress!
If a power failure or similar accident occurs during the update process, the RD-800 won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Getting the update file

Please open/extract the downloaded "rd800_sys_v104.zip" file on your computer to get the update files in the "rd800_sys_v104" folder.

Procedure for the update

Creating the Update USB Memory

Copy update files R055_UPA.BIN to the root directory of a USB Memory.

Update Procedure

Make sure the unit's power is switched off, then connect the USB memory device into the USB MEMORY/WLAN ADAPTOR connector.
Hold down [ WRITE ] and switch on the power to the unit.
The message "start update." appears and the update starts.
When the message " update finished. " appears, the system update has finished.

* You will take about two minutes to update.
* Never switch off the power or detach the USB memory device until the message " update finished. " appears. Doing so may damage the unit.
Switch off the unit and detach the USB memory device.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

RD-800 System Update Version 1.04

支援

Quick Links