Roland - 支援 - SPD-SX - 更新&驅動程式 - SPD-SX System Program (Ver.1.07)

SPD-SX System Program (Ver.1.07)

How to tell the version

Please check the version of the system working on your SPD-SX before downloading the archive file.

Press [ MENU ] to invoke the menu screen.
Use the cursor buttons to select [ UTIL ], and then press the [ ENTER ] button. The UTILITY screen will appear.
Use the cursor buttons to select [ INFORMATION ], and then press the [ ENTER ] button. The INFORMATION screen will appear.
The version infromation screen appears.

*Don't perform the update if the product is already up-to-date.

Update history

[ Ver.1.07 ]
Bug Fix
The following bug was fixed.

Sound drop-out sometimes occurs during sample playback.

[ Ver.1.06 ]
Additional Functions

Five new Trigger Type selection are available: "RT30K", "RT30HR", "RT30H_SN", "RT30H_TM", and "KT10."
Advanced Noise Cancel Parameter is added, specific for the use of "RT-30K" and "RT-30HR."
For details, please refer to "About the RT-30's "Noise Cancel" Function (SPD-SX_l_noise_e01_W.pdf)" in the [ Owner's Manuals ].

[ Ver.1.04 ]
Bug Fix
The following bug was fixed.

Click sounds may oscillate.

[ Ver.1.03 ]
Additional Functions

Added "BT-1" to the Trigger Type.
Added "PDX-100", "PD-108" and "PD-128" to the Trigger Type.

[ Ver.1.02 ]
Functionality Improvement

Improved a stability on a USB connection.

Bug Fixes
The following bugs were fixed.

On the [WAVE LIST] screen in the [UTILITY] menu, SPD-SX might hang up when previewing multiple WAVEs continuously. It was corrected.
On the [WAVE LIST] screen in the [UTILITY] menu, added waves might not appear on the display. It was corrected.

What you will need to update your SPD-SX

SPD-SX
USB flash drive ( Roland's M-UF2G is recommended )
* It needs to be formatted with MS-DOS file system (FAT or FAT32) on a PC.
A computer with a USB connector ( Windows, Mac )

Cautions with the update

Never apply this update data to any product other than the SPD-SX. This update data may destroy the data or system program of other products.
Never power-off your SPD-SX while the update is in progress!
If a power failure or similar accident occurs during the update process, the SPD-SX won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Getting the update file

Please open/extract the downloaded "spdsx_sys_v107.zip" file on your computer to get the update files in the "spdsx_sys_v107" folder.

Procedure for the update
Please refer to the following procedure to install the extracted system program to your SPD-SX.

Creating the USB memory for update

Connect the USB memory to the USB connector of your computer.
Copy the "_BOOTPRG.ES_" file from the extracted "spdsx_sys_v107" folder to the root folder of the USB memory.
* Copy not the "spdsx_sys_v107" folder, but the "_BOOTPRG.ES_" file only.
Disconnect the USB memory from your computer as follows.
[ Windows ]
Use the Safely Remove Hardware icon in the Windows task tray to un-mount the USB memory. And then disconnect the USB memory from your computer.
[ Mac ]
Drag the Drive icon of the USB memory into the trash in the dock. And then remove the USB memory from your computer.

Update Procedure

Never power-off your SPD-SX while the update is in progress!

Leaving the power to the SPD-SX switched off; connect the USB Memory to the "USB MEMORY connector".
Hold down the ALL SOUND OFF, QUICK and EXIT button and turn on SPD-SX.
* You need to keep pressing the button until the message "SPD-SX UPDATER" appears on the display.
The update process will start automatically.
When the update completes, the message "Turn power off and on again" will appear on the display.
After confirming the update completion, turn off the SPD-SX.
Detach the USB Memory to the unit.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

SPD-SX System Program (Ver.1.07)

支援

Quick Links