Roland - 支援 - SPD-SX PRO - 更新&驅動程式 - SPD-SX PRO FACTORY RESTORE DATA

SPD-SX PRO FACTORY RESTORE DATA

SPD-SX PRO FACTORY RESTORE DATA
Contains default configuration files to restore the SPD-SX PRO to factory settings including wave and kit.

¦What you will need to restore your SPD-SX PRO

SPD-SX PRO
A computer with a USB connector (Windows, Mac)
USB Memory (Formatted to FAT32 or MS-DOS(FAT) on a computer in advance)

¦Cautions With The Update

When you execute the following factory restore operation, all parameter in the SPD-SX PRO will be overwritten.
If the SPD-SX PRO contains important data that you want to keep, save it to a USB flash drive before you proceed.

?Factory Restore Procedure

The complete factory restore procedure includes two steps in the following order.

Creating a USB memory for updating.
Updating the SPD-SX PRO to the original factory data.

?Creating USB Memory For Updating:

Open/extract the downloaded “spdsxpro_factory_data102.zip” file on your computer. A “Roland” folder will appear.
Connect the USB memory to the USB connector of your computer.
Copy the extracted "Roland" folder to the root folder of the USB memory.
* Copy the entire folder, not the contents of the "Roland" folder.
Un-mount the USB memory from your computer as follows:

[Windows]
Use the Safely Remove Hardware icon in the Windows task tray to unmount the USB memory and then disconnect the USB memory from your computer.

[Mac]
Drag the Drive icon of the USB memory into the trash in the dock and then remove the USB memory from your computer.

?Update Procedure:

Connect your USB memory to the USB MEMORY connector of the SPD-SX PRO.
On the SPD-SX PRO, press the [MENU] button.
Use the cursor arrow buttons to select “BACKUP” on the screen and then press the [ENTER] button.
Use the cursor arrow buttons to select “LOAD” on the screen and then press the [ENTER] button.
Use the [-] [+] buttons to select "1.Contents_V1020" on the screen and then press the [F6](LOAD) button.
A confirmation message will appear.
Use the cursor arrow buttons to select OK”, and press the [ENTER] button.
The original factory data will be loaded.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

SPD-SX PRO FACTORY RESTORE DATA

支援

Quick Links