Roland - 支援 - TD-17 - 更新&驅動程式 - TD-17 System Program ( Ver.1.02 )

TD-17 System Program ( Ver.1.02 )

How to tell the version

Please check the version of the system working on your TD-17 before downloading the archive file.

Press the [ SETUP ] button.
The SETUP MENU will appear.
Use the cursor buttons to move the cursor to System Info, then press the [ ENTER ] button.
The version information screen appears.

* Don't perform the update if the product is already up-to-date.

Version history

[ Ver.1.02 ] SEP 2020

Support for new drum pads was added.

Bug Fixes
The following bugs were fixed.

The curve characteristics for VOLUME were corrected.
Under certain conditions, user samples failed to be previewed correctly.

[ Ver.1.01 ] AUG 2018

Minor bugs have been fixed.

Items to prepare for the update

Following items are required to perform the update.

TD-17 itself
PC to write the updater to the SD Card
SD Card formatted on the TD-17

Cautions with the update

Never apply this update data to any product other than the TD-17. This update data may destroy the data or system program of other products.
Never power-off your TD-17 while the update is in progress!
If a power failure or similar accident occurs during the update process, the TD-17 won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

How to download and expand the archive file

Download the file named "td17_sys_v102.zip".
The downloaded file is an archive file in zip format. Right-click to select Extract All, and then follow the instructions.
After expanding the file, the folder "td17_sys_v102" holding the file "TD17_UPA.BIN" will be appeared.

How to update

Please install the system program "TD17_UPA.BIN" to the TD-17 by following the process below.

Step 1:Formatting an SD Card

Please refer to the "Formatting an SD Card" for detailed information in the [ TD-17 Owner's Manuals ].

Insert an SD card into TD-17.
Access the SD CARD MENU screen.
Use the dial to select the " SD Card Format ", and press the [ ENTER ] button.
Press the [ F3 ] (EXECUTE) button.
Press the [ ENTER ] button to execute.

Step 2:Backing Up Data to an SD Card

Please refer to the "Backing Up Data to an SD Card" for detailed information in the [ TD-17 Owner's Manuals ].

Insert an SD card into TD-17.
Press the [ SETUP ] button.
Use the dial to select the "SD Card," and press the [ ENTER ] button.
Use the dial to select the "Save Backup," and press the [ ENTER ] button.
Use the [?] [?] buttons and the dial to make backup settings "User Sample".
Press the [ F3 ] (NEXT) button.
Press the [ F3 ] (EXECUTE) button.
Press the [ ENTER ] button to execute.

Step 3:Updating the TD-17

Copy the update-use file ( TD17_UPA.BIN ) to the root directory of the SD Card.
Make sure the unit's power is switched off, then insert the SD Card to the SD CARD slot.
Holding down the [ REC ] button and turn on the power.
When the message "=== update ===" appears, release the button.
The update starts.
* You will take about 5 minutes to update. Be sure never to switch off the power before the operation finishes.
When the message "update finished." is displayed, the operation has finished.
Turn off the power.
Detach the SD Card, then switch on the power to the unit and verify that the version has been updated.

Execute Factory Reset according to the following procedure.
Please refer to the "Restoring the Factory Settings" for detailed information in the [ TD-17 Owner's Manuals ].
Press the [ SETUP ] button.
Use the dial to select the " Factory Reset ", and press the [ ENTER ] button.
Press the [ F3 ] (EXECUTE) button.
Press the [ ENTER ] button to execute.

Step 4:Loading Backup Data from an SD Card

Please refer to the "Loading Backup Data from an SD Card" for detailed information in the [ TD-17 Owner's Manuals ].

Insert an SD card into TD-17.
Press the [ SETUP ] button.
Use the dial to select the "SD Card," and press the [ ENTER ] button.
Use the dial to select the "Load Backup," and press the [ ENTER ] button.
Use the [?] [?] buttons and the dial to specify the loading settings "User Sample".
Press the [ F3 ] (EXECUTE) button.
Press the [ ENTER ] button to execute.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

TD-17 System Program ( Ver.1.02 )

支援

Quick Links