Roland - 支援 - TD-30K - 更新&驅動程式 - TD-30 System Program (Ver.1.13)

TD-30 System Program (Ver.1.13)

Important Nortice
When you use the "TD-30 System Program Version 1.10 or later" with connecting to your computer via USB, you need to use the following USB Drivers.
This version or later cannot work with the "TD-30 USB MIDI Driver."

TD-30 Driver for Windows 10
TD-30 Driver for Windows 8 / 8.1
TD-30 Driver for Windows 7 / Vista / XP
TD-30 Driver for macOS 10.13
TD-30 Driver for macOS 10.12
TD-30 Driver for OS X 10.11
TD-30 Driver for OS X 10.10
TD-30 Driver for OS X 10.9
TD-30 Driver for OS X 10.8
TD-30 Driver for Mac OS X 10.4 / 10.5 / 10.6 / 10.7

How to tell the version
Please check the version of the system working on your TD-30 before downloading the archive file.

Press the [ SETUP ] button.
The [ SETUP ] button will light, and the SETUP A screen will appear.
Press the [ F5 ] button to display the "SETUP C" screen.
Press the [ F4 ] ( INFO ) button.
The INFO screen will appear.
Press the [ F5 ] ( VERSION ) button.
The version information screen appears.
Turn TD-30 off after checking the version.

* Don't perform the update if the product is already up-to-date.

Update history

[ Ver.1.13 ]

[Additional function]

Five new Trigger Type selection are available: "RT30K", "RT30HR", "RT30H_SN", "RT30H_TM", and "KT10."
<Details of two Trigger Types for RT-30H>
RT30H_SN: Suitable when the RT-30H is mounted on a snare drum.
RT30H_TM: Suitable when the RT-30H is mounted on toms.
Advanced Noise Cancel Parameter is added, specific for the use of "RT-30K" and "RT-30HR."
For details, please refer to "About the RT-30's "Noise Cancel" Function (TD-30_l_noise_e01_W.pdf)" in the [ Owner's Manuals ].

[Functionality Improvement]

Hi-Hat Behavior with the MIDI Note Number
The TD-30 will trigger the sound of "HI-HAT Edge (RIM)" without that of "HI-HAT Bow (HEAD)" when you setup the MIDI Note Number of "Closed" for "HI-HAT Edge (RIM)."

[ Ver.1.12 ]

[Additional function]

Added "BT1" and "BT1 SENS" to the Trigger Type.
Trigger Type: BT1
This trigger type is used for triggering one sound, or when using the BT-1 as a switch for pattern playback etc.
Trigger Type: BT1 SENS
This trigger type allows good response from the BT-1 when playing softly or with dynamics.
* However, crosstalk may occur when playing the surrounding pads.

[Bug Fix]
The following bugs were fixed.

You cannot choose "AMBIENCE SW" and "MFX SW" for the USER Pad Switch Functions.
The TD-30 hangs up when it receives the MIDI System Exclusive Message which includes huge data in one message.

[ Ver.1.10 ]

Supported USB Audio.
Please refer to the "Functions Added in TD-30 Version 1.10 ( TD-30_l_V110_e02_W.pdf )" for detailed information.
Available for Roland Wireless Connect ( WNA1100-RL ).
Please refer to the "About the Wireless LAN Function ( TD-30_l_wireless_e01_W.pdf )" for detailed information.

What you will need to update your TD-30

TD-30
USB Memory ( Roland's M-UF2G is recommended )
* The USB Memory need to be formatted on a TD-30.
A computer with a USB connector (Windows, Mac)

Cautions with the update

Never apply this update data to any product other than the TD-30. This update data may destroy the data or system program of other products.
Never turn-off your TD-30 while the update is in progress!
If a power failure or similar accident occurs during the update process, the TD-30 won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Getting the update file

Please open/extract the downloaded "td30_sys_v113.zip" file on your computer to get the update files in the "td30_sys_v113" folder.

Procedure for the update
CAUTION
Save your user data to a USB memory before you perform the update.
You will be able to restore the original state by reloading the data you saved.

Please refer to the following procedure to install the extracted system program to your TD-30.

Step 1 : Uninstall the TD-30 USB MIDI Driver

If you install the TD-30 USB MIDI Driver to your computer, uninstall it.

[ Windows ]

Start up Windows with all USB cables disconnected.
( except for keyboard and mouse )
Exit all applications before you begin the uninstallation.
Open "Control Panel" and click "Add or Remove Programs."
In the list, choose "TD-30 USB MIDI Driver", and click "Change/Remove."
The display will indicate "The installed TD-30 USB MIDI Driver will be uninstalled." and click the [ OK ].
* If any other message appears, follow the directions of the message.
When the message "Uninstallation was completed." is displayed, click [ OK ] to restart Windows.

[ Mac ]

Start computer with all USB cables disconnected.
( except the keyboard and mouse )
Double-click "Uninstaller."
The display will indicate "This uninstalls TD-30 USB MIDI driver from this Mac."; click [Uninstall].
* If any other message appears, proceed as directed by that message.
The display will indicate "Are you sure you want to uninstall the driver?"; click [OK].
A dialog box will ask you for a password; enter your password and click [OK].
The display will indicate "Uninstllation is completed."; click [Restart]. Your computer will then restart.
* It may take some time for restarting the computer.

Step 2 : Formatting USB Memory

* When you format a USB memory, all data stored in it will be erased.

Turn on TD-30.
Connect a USB memory to the "USB MEMORY port".
Press the [ USB MEM ] button.
The [USB MEM] button will light, and the USB MEMORY A screen will appear.
Press the [F5] (A<>B) button.
The USB MEMORY B screen will appear.
Press the [F4] (FORMAT) button.
The USB FORMAT screen will appear.
Press the [F5] (FORMAT) button.
A confirmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
Press the [F5] (EXECUTE) button.
The format operation will be executed.

Step 3 : Backing Up All Data to a USB Flash Drive (SAVE)

Turn on TD-30.
Connect a USB memory to the "USB MEMORY port".
Press the [ USB MEM ] button.
The [USB MEM] button will light, and the USB MEMORY A screen will appear.
Press the [F1] (SAVE) button.
The USB SAVE screen will appear.
Use the [ - ] [ + ] buttons or the dial to select the backup number in which you want to save your settings.
Backup number that contain no data are indicated by a "*" preceding the backup name.
Press the [ F5 ] (SAVE) button.
A confirmation message will appear.
* If you decide to cancel, press the [F1] (CANCEL) button.
Press the [ F5 ] (EXECUTE) button.
Your data will be saved on the USB flash drive.

Step 4 : Creating the USB memory for update

Connect the USB memory to the USB connector of your computer.
Copy the all update files in the above to the root folder of the USB memory.
* Do not copy the "td30_sys_v113" folder.
Disconnect the USB memory from your computer as follows.
[ Windows ]
Use the Safely Remove Hardware icon in the Windows task tray to un-mount the USB memory. And then disconnect the USB memory from your computer.
[ Mac ]
Drag the Drive icon of the USB memory into the trash in the dock. And then remove the USB memory from your computer.

Step 5 : Update Procedure

Never turn-off your TD-30 while the update is in progress!

After turning the TD-30 off, connect the USB Memory to the "USB MEMORY port".
Hold down the [USB MEM] button and turn on TD-30.
Continue to hold down [USB MEM] until the message "Please Wait..." appears.
A confirmation screen will be displayed after a short time.
* Verify that the screen indicates each version of Prog1, Prog2 and Prog3, and the three versions are the same.
Push the [ USB MEM ] button to start the update process. If you decide to stop the update, turn TD-30 off.
* The update process will be done within about two minutes. Never turn TD-30 off during the process.
When the message "Update Completed." appears, the update has finished.
Turn the TD-30 off.
Detach the USB Flash Memory, then turn the TD-30 on and verify that the version has been updated.

Step 6 : Restoring the Factory Settings (F RESET)

Press the [ SETUP ] button.
The [SETUP] button will light, and the SETUP A screen will appear.
In the SETUP A screen, press the [ F4 ] (F RESET) button.
The FACTORY RESET screen will appear.
Press the [ F5 ] (F RESET) button.
A confirmation message will appear.
* If you decide to cancel the factory reset, press the [F1] (CANCEL) button.
Press the [ F5 ] (EXECUTE) button.
The factory reset will be executed.
The "AUTO OFF" FUNCTION screen will be displayed when the factory reset has been completed.
Turn the TD-30 off.

Step 7 : Loading Backup Data from a USB Flash Drive (LOAD)

Turn on TD-30.
Connect a USB memory to the "USB MEMORY port".
Press the [ USB MEM ] button.
The [USB MEM] button will light, and the USB MEMORY A screen will appear.
Press the [F2] (LOAD) button.
The USB LOAD screen will appear.
Use the [ - ] [ + ] buttons or the dial to select the backup data that you want to load.
Press the [ F5 ] (LOAD) button.
A confirmation message will appear.
* If you decide to cancel, press the [F1] (CANCEL) button.
Press the [ F5 ] (EXECUTE) button.
The data will be loaded from the USB flash drive.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

TD-30 System Program (Ver.1.13)

支援

Quick Links