Roland - 支援 - - 更新&驅動程式 - V-800HD System Program Version 1.55

V-800HD System Program Version 1.55

This system program updates the V-800HD system program to the latest version 1.55.

Important Notice
For the upgrade from the V-800HD of earlier than version 1.50, the memory is not preserved.
At the first booting after update, factory reset is executed automatically.

* For the upgrade from the V-800HD of version 1.50, the memory is preserved.

How to know the version

Before you start, check the system program version of your V-800HD.

Turn V-800HD power OFF.
While holding down [ OUTPUT FADE ON ], turn power ON.
* Continue holding down OUTPUT FADE ON until the version information appears on the Seven-Segment LED display.
The version will be displayed at the center on the screen.
Turn power OFF.

Update history
[ Ver.1.55 ] APR 2016
Bug Fixes
The following bugs were fixed.

The problem of SDI input being impossible in extremely rare cases was corrected.
Format detection for RGB input was improved, and the problem of 1,366 x 768/60 Hz being mistakenly recognized as 1,280 x 768/60 Hz was corrected.

[ Ver.1.52 ]

Internal processing has been improved.
* There is no change affecting the product specification.

[ Ver.1.51 ]
Bug Fixes
The following bugs were fixed.

The image of the composite output may be corrupt.
The settings stored in MEMORY Buttons may be deleted after power-off.
Rainbow noise may appear when the output format of the main output or analog outputs is switched.
With MacBook Pro equipped with Thunderbolt connected by analog RGB, OUTPUT from V-800HD and the output image color of the preview were incorrect.
When Output Freeze is enabled, the output assigned to the internal memory number 1 becomes pink.

[ Ver.1.50 ]
Additional function / Function Improvements

* For more information, refer to the "V-800HD Version 1.50 Added Functions" section of the "V-800HD Owner's Manual", and "V-800HD Reference Manual".

Supports 3G-SDI Level B Mapping Structure
The V-800HD ver.1.5 supports level B mapping structure of 3G-SDI (1080p50Hz, 1080p59.94Hz).
Sync with Input Video Signal
The V-800HD ver.1.50 can synchronize with SDI input.
Field Sync Processing
While the V-800HD input/output interlaced signals, synchronization of fields is possible.
A/B Mode Switching
You can select A/B mode for video switching.
AUX Output of the Input Signal
You can directly send the input channel signal to the AUX bus.
Selection of the Recalling Parameter
You can select the parameters to recall when you operate the MEMORY buttons.
Automatic Memory Save
If this is turned on, the current status of the V-800HD is saved to memory 1-1 automatically. The status is loaded at next booting and the status returns.
Expanded Color Correction Range
The range of color correction is expanded.
Fine Adjustment of Chroma Key HUE
The extraction color was fixed to blue or green in previous version. Now it's possible to fine adjust the color.
Supports Multi-view monitor not compatible with HDCP
As the multi-view monitor, now you can connect HDCP non-compatible product.
Version Number Display
You can check the version number in System menu of the V-800HD.

[ Ver.1.02 ]
Bug Fix
The following bug was fixed.

Improper method to detect a color space of DVI input.

Function Improvements

Improved the process for deinterlacing a interlaced video input to enhance image quality.
Output to the multi-view monitor supports DVI-D.
Please refer to the "Format Selection of Multi-view Monitor Output ( V-800HD_ver102_add_e01.pdf )" for detailed information.

What you will need to update

V-800HD
HDCP-compatible monitor display
USB Memory ( Roland's M-UF2G is recommended )
* Before you start, use a computer to format the device using the FAT32 file system.

Getting the update file

Please open/extract the downloaded "v800hd_sys_v155.zip" file on your computer to get the update file named "V-800HD.PRG" in the "v800hd_sys_v155" folder.

Caution when performing the update

Never apply this update data to any product other than the V-800HD. This update data may destroy the data or system program of other products.
Never power-off your V-800HD while the update is in progress!
If a power failure or similar accident occurs during the update process, the V-800HD won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Procedure for the update

Creating the Update USB Memory

Copy update files V-800HD.PRG to the root directory of a USB Memory.

Update Procedure

Connect USB memory to V-800HD's USB port. Turn the power on with pressing [ PinP1 ] + [ PinP4 ] + [ EXIT ] buttons.
Release the buttons after displaying "Upd" on the Seven-Segment LED display under [ TRANSITION ].
Push the [ ENTER ] button after " . "(dot) stops blinking on the Seven-Segment LED display. Then the update process will start.
The " OK " will be displayed on the Seven-Segment LED display when the update process is completed.
Turn the power off and un-mount the USB memory from V-800HD.
Connect an HDCP-compatible monitor display to the HDMI OUT Connector of the V-800HD.
* Use an HDCP-compatible monitor. HDCP-incompatible monitors cannot display the menu.
Turn the power ON again with pressing [ STORE ].
The "ddC" is displayed on the Seven-Segment LED display of the V-800HD and the mode switches to "CHANGE RGB DDC".
A menu is displayed on the monitor display.
When "Push [Enter] to Start WRITING" is displayed on the bottom of the menu, press the [Enter] button to start the DDC writing.
When "WRITE COMPLETE" is displayed on the bottom of the menu, the writing is completed.
Turn V-800HD power OFF.
* It takes approximately 40 seconds for the DDC writing.
While holding down [ OUTPUT FADE ON ] button, turn power ON.
Check the version number on the display.
Turn V-800HD power OFF.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

V-800HD System Program Version 1.55

支援

Quick Links