更新&驅動程式

• Fantom-X Driver Version 1.0.0 for Windows Vista 32-bit Edition

  For Product(s): Fantom-X6 / Fantom-X6 Audio Track Expansion / Fantom-X7 / Fantom-X7 Audio Track Expansion / Fantom-X8 / Fantom-X8 Audio Track Expansion / Fantom-XR / Fantom-XR Sample Tools Expansion

• Fantom-X Driver Version 1.0.0 for Windows Vista 64-bit Edition

  This is the Fantom-X6/X7/X8 driver for Microsoft(R) Windows(R) Vista(TM) 64-bit Operating Systems.

• Fantom-X Series USB Driver v1.0 for Mac OS 10.6

  This is the USB driver for Mac OS X 10.6 (Snow Leopard).

• Fantom-X Series USB Driver v1.20 for Mac OS 10.5 and Earlier

  This is the USB driver for Mac OS X 10.5 (Leopard) and earlier.

• Fantom-XA System Update Version 1.05

  This is the latest operating system for the Fantom-XA. Please read the readme.pdf document for the update procedure.
  
  
  This update resolves USB Storage related issues. This update also resolves a timing issue within the sequencer.
  
  
  NOTE: The update files that you download and save to your computer from the link above are enclosed in a
  
  compressed zip file. These files will need to be extracted from the zip file before you can burn them to a CD.
  You can do this by using the WinZip application on your PC running Windows XP, or by using Stuffit Expander on your
  
  Macintosh (needed for OS 10.2.x or below). If you're using Mac OS X 10.3.x or above, then you will not need Stuffit
  
  Expander.
  
  
  
  When you double-click on the downloaded file that you saved to your computer, WinZip or Stuffit Expander should startup
  
  automatically. If you do not have WinZip (PC) or Stuffit Expander (Mac) installed, then you must download it, install
  
  it, and extract/unzip the update files folder before you can complete the update procedure.
  
  
  
  You can get WinZip from the following link:http://winzip.com
  
  
  
  You can get Stuffit Expander from the following link:
  href=http://www.stuffit.com/mac/expander/>http://www.stuffit.com/mac/expander/

• Fantom-X USB Drivers (MAC Classic)

  Use this driver for Macs running OS 8.x and 9.x.

• Fantom-X USB Drivers (PC)

• Fantom-X Editor Version 1.53 (PC)

  Fantom-X Editor/Librarian for Fantom-XA and Fantom-X6,7,8,XR running version 1.
  Version 1.53 of the editor adds compatibility for the SRX-12 Expansion Board.

• Fantom-X Editor Version 1.53 (MAC)

  Fantom-X Editor/Librarian for Fantom-XA and Fantom-X6,7,8,XR running version 1.
  Version 1.53 adds compatibility with the SRX-12 Expansion Card.

• SRX-03 Refill Patches for Fantom-X/S

  Originally, this is intended for Fantom-S Series, however it can be convert loaded to Fantom-X Series by means of Fantom-X Editor software. Please refer to "readme" documents for further details.
  
  For Product(s): Fantom-X6 / Fantom-X7 / Fantom-X8 / Fantom-XR / Fantom-Xa / SRX-03 / Fantom-S / Fantom-S88

• SRX-04 Refill Patches for Fantom-X/S

  Originally, this is intended for Fantom-S Series, however it can be convert loaded to Fantom-X Series by means of Fantom-X Editor software. Please refer to "readme" documents for further details.
  
  For Product(s): Fantom-X6 / Fantom-X7 / Fantom-X8 / Fantom-XR / Fantom-Xa / SRX-04 / Fantom-S / Fantom-S88

• Clean-All USB Driver Utility

  This utility clears out all Roland USB Windows drivers and should be used if you are having difficulty installing your USB driver.
  
  Note: You will have to reinstall the drivers for any other Roland device that is using a USB connection for Audio or MIDI.